|
|
|
| Flow characteristics of low-lift and large flow rate pump installation in saddle zone |
| Zheng Yuan1, Mao Yuanting1, Zhou Daqing1, Zhang Dan2 |
| (1.School of Energy and Electrical Engineering, Hohai University, Nanjing, Jiangsu 210098, China; 2.Ertan Hydropower Development Company Ltd., Chengdu, Sichuan 610021,China) |
|
|
|
|
Abstract Numerical and experimental methods were applied to investigate the axial pump flow characteristics in the saddle zone. The standard k-εturbulence model and SIMPLEC algorithm were chosen in computation fluid dynamics software Fluent, the Reynolds averaged Navier-Stokes equation was dispersed by the finite volume method, and external characteristics of axial pump model were numerical simulated in a test facility from 20% to 130% of designed flow rate. The results between numerical calculation and model experiment were compared. Flow characteristics in saddle zone were studied by comparing flow patterns between designed condition and small flow rate condition. The results show that unsteady operation saddle zone exists between 50% of designed flow rate and 65% of designed flow rate. Large range recirculation and vortex exist at the inlet and outlet of the impeller under small flow rate condition. Intensive power exchange is the main cause of the pump unstable operation.The results of three dimensions CFD simulation and test results agree well near the best efficiency point, and deviations are up to 5% at part load condition, which indicates the effectiveness and accuracy of numerical simulation.
|
|
Received: 23 September 2010
Published: 30 September 2011
|
|
|
|
| [1] Akinori Furukawa, Toru Shigemitsu,Satoshi Watanable.Performance test and flow measurement of contrarotating axial flow pump[J]. Journal of Thermal Science,2007,16(1):7-13.[2] 郑 源,张 健.水力机组过渡过程［M］.北京:北京大学出版社,2008:109-110.[3] 潘中永,倪永燕,袁寿其,等.斜流泵研究进展[J].流体机械,2009,37(9):37-41.Pan Zhongyong,Ni Yongyan,Yuan Shouqi,et al.Overview for research on mixed flow pumps with vaned diffuser[J]. Fluid Machinery,2009,37(9):37-41.(in Chinese)[4] Masahiro Miyabe,Hideaki Maeda,Isamu Umeki,et al.Unstable head flow characteristic generation mechanism of a low specific speed mixed flow pump [J]. Journal of Thermal Science,2006,15(2):115-120.[5] 施法佳,陈红勋.轴流泵内部流动数值模拟中湍流模式可用性的研究[J].上海大学学报:自然科学版,2006,12(3):273-276.Shi Fajia,Chen Hongxun.Applicability of turbulent models in simulation of internal flow within axial flow pump[J]. Journal of Shanghai University:Natural Science,2006,12(3):273-276.(in Chinese)[6] 陆林广,伍 杰,陈阿萍,等.立式轴流泵装置的三维流动数值模拟[J].排灌机械,2007,25(1):29-32.Lu Linguang,Wu Jie,Chen Aping,et al.Numerical simulation of 3D turbulent flow in a vertical axial pump system [J]. Drainage and Irrigation Machinery, 2007, 25(1): 29-32.(in Chinese)[7] 陆林广,梁金栋,陈阿萍,等.卧式前轴伸泵装置流道三维流动及水力损失[J].排灌机械,2009,27(1):48-50.Lu Linguang,Liang Jindong,Chen Aping,et al.3D turbulet flow and hydraulic loss for pump system with horizontal forward extension shaft[J]. Drainage and IrrigationMachinery, 2009,27(1):48-50.(in Chinese) [8] Peng X, Corzine K A,Venayagamoorthy G K.Multiple reference framebased control of threephase PWM boost rectifiers under unbalanced and distorted input conditions [J]. Transactions on Power Electronics,2008,23(4): 2006-2017.[9] 郑 源,肖玉平,刘文明,等.大型竖井式贯流泵装置的数值模拟与性能预测[J].排灌机械,2009,27(6):393-397.Zheng Yuan,Xiao Yuping,Liu Wenming,et al.Numerical simulation and performance prediction for large scale shaft well tubular pump unit[J]. Drainage and Irrigation Machinery, 2009,27(6):393-397.(in Chinese)[10] Perez Flores P, Kosyna G,Wulff D.Suppression of performance curve instability of an axialflow pump by using a double inlet nozzle[J]. International Journal of Rotating Machinery,2008:536850. |
|
|
|
