|
|
Application of 3D-model for Centrifugal Pump Flowpassage Parts |
LIU Wei-wei, LI Hong, LI An-hu |
Jiangsu University, Zhenjiang 212013, China |
|
|
Abstract Based on the 3D-model of pump, introduces the application of centrifugal pump flowpassageparts, explains the important functions of the solid in the post process. Discusses indetail the role of solidmodel in the analysis of flow field, takes the channel of volute as an example, establishes the controllingequation, sets the computational region and boundary conditions, gives the process and result of analysis,finally introduces the aspects including transforming solid model into 2D-model drawings, machining ofnumerical control, assembly and so on, and also shows the illustrations of application.
|
Received: 08 August 2013
|
|
|
|
[1] 王福军.水泵叶轮的计算机三维实体造型研究[J].农业机械学报,1997(2):67-69[2] 刘厚林,袁寿其,施卫东.离心泵水力元件三维实体造型研究[J].水泵技术,2003(3):22-33[3] 李春,倪建华,苏进.离心泵叶轮叶片三维参数化造型技术研究[J].水泵技术,2003(2):22-25[4] 刘厚林,袁寿其,施卫东.双流道叶轮内湍流的数值模拟[J].排灌机械,2002(4):5-8[5] 李安虎.基于MDT的离心泵三维造型及应用[D].镇江:江苏大学,2004[6] 陶文铨.数值传热学(第2版)[M].西安:西安交通大学出版社,2002:1-10 |
|
|
|