|
|
|
| Experimental study on cavitation characteristics of mixed-flow pump during startup |
| CHEN Zonghe1, SHI Weidong1,2*, ZHANG Dengsheng1, ZHANG Junjie3, ZHANG Zhiwei1 |
| 1. National Research Center of Pumps, Jiangsu University, Zhenjiang, Jiangsu 212013, China; 2. School of Mechanical Engineering, Nantong University, Nantong, Jiangsu 226019, China; 3. Shanghai Institute of Quality Inspection and Technical Research, Shanghai 200072, China |
|
|
|
|
Abstract A high-speed photographical experiment was carried out on a mixed-flow pump with 0.25 mm tip clearance during its startup period to study cavitation characteristics of the pump at various flow rates, inlet pressures and startup times. The cavitation phenomena in the pump were observed at 0.80Qd,0.90Qd,1.00Qd and 1.05Qd flow rates and 10 s, 15 s and 20 s startup times. During the initial stage of startup process, since the rotating speed is so low that the pressure in the impeller eye does not reach the saturated vapor pressure of water, no cavitation appears at all. As startup process arrives at its stable stage, cavitating bubbles appear at the impeller tip firstly, then propagate into impeller passages to result in severe cavitation. At the same flow rate, the lower the inlet pressure(cavitation number)is, the more serious cavitation occurs. At the same inlet pressure and flow rate, the degree of ca-vitation in the pump is gradually intensified with startup advancing, and the most serious degree of ca-vitation occurs in the stable stage at different startup times.
|
|
Received: 05 November 2017
|
|
|
|
| [1]练永庆,田兵,王树宗,等. 空气涡轮泵发射系统发射过程仿真分析[J]. 兵工学报,2011,32(2):155-162. LIAN Yongqing, TIAN Bing, WANG Shuzong, et al. Simulation and analysis of launching process of air turbo-pump launching system [J]. Journal of military engineering, 2011, 32(2): 155-162.(in Chinese)[2]王乐勤,吴大转,郑水英,等. 混流泵开机瞬态水力特性的试验与数值计算[J]. 浙江大学学报(工学版),2004,38(6):751-755. WANG Leqin, WU Dazhuan, ZHENG Shuiying, et al. Test and numerical calculation of transient hydraulic characteristics of mixed-flow pump starting [J]. Journal of Zhejiang University(engineering edition), 2004, 38(6): 751-755.(in Chinese)[3]何志霞,张鑫,陈驭航,等. 单孔孔板水力空化特性的可视化与数值模拟[J]. 江苏大学学报(自然科学版), 2017,38(4):416-422. HE Zhixia, ZHANG Xin, CHEN Yuhang, et al. Visualization and numerical simulation of hydraulic cavitation characteristics of single orifice plates [J]. Journal of Jiangsu University(natural science edition), 2017,38(4):416-422.(in Chinese)[4]孙帅辉,刘蓉,郭鹏程,等. 转速对涡旋液泵空化性能的影响[J]. 流体机械, 2018, 46(4):25-31,36. SUN Shuaihui, LIU Rong, GUO Pengcheng, et al. The effect of rotational speed on the cavitation performance of scroll pump [J]. Fluid machinery, 2018, 46(4): 25-31,36.(in Chinese)[5]李伟,季磊磊,施卫东,等. 基于准稳态假设的混流泵启动特性分析[J]. 农业工程学报, 2016, 34(7):86-92. LI Wei, JI Leilei, SHI Weidong, et al. Starting characteristic analysis of mixed-flow pump based on quasi-steady state assumption [J].Transactions of the CSAE, 2016, 34(7): 86-92.(in Chinese)[6]李伟. 斜流泵启动过程瞬态非定常内流特性及试验研究[D]. 镇江:江苏大学, 2012.[7]席光,卢金铃,祁大同. 混流泵叶轮内部流动的PIV试验[J]. 农业机械学报,2006,37(10):53-57. XI Guang, LU Jinling, Qi Datong. PIV test of internal flow in impeller of mixed-flow pump [J].Transactions of the CSAM, 2006,37(10):53-57.(in Chinese)[8]FERNANDEZ J,BLANCO E,SANTOLARIA C,et al. A numerical analysis of a mixed flow pump[C]//Procee-dings of the ASME 2002 Joint US-European Fluids Engineering Division Conference,2002:791-798. [9]NAGAHARA Takahide,SATO Tadashi,OKAMURA Tomoyoshi,et al. Effect of the submerged vortex cavitation in pump suction intake on mixed flow pump impeller[J].タ-ボ械,2002:70-75. |
|
|
|
