|
|
|
| Conduit Hydraulic optimization of the slanted pump system for Babao Pumping Station of Hangzhou |
| PAN Zhijun1, XU Lei2*, SHEN Xiaoyan3, HONG Fei2, ZHANG Hao1 |
| 1.Hangzhou Nanpai Construction Management Office, Hangzhou, Zhejiang 310000, China; 2.School of Hydraulic, Energy and Power Engineering, Yangzhou University, Yangzhou, Jiangsu 225009, China; 3.Zhejiang Design Institute of Water Conservancy & Hydro-electirc Power, Hangzhou, Zhejiang 310002, China |
|
|
|
|
Abstract In order to ensure the slanted pump system of Babao Pumping Station to operate safely, reliably and efficiently, the optimum hydraulic design on the station′s slanted inlet conduit and slanted outlet conduit has been completed by the method of three-dimensional turbulent flow numerical simulation. Based on the numerical simulation results, the influences of conduit height and pump shaft angle on the hydraulic performance of slanted inlet conduit were respectively studied and the influences of diffusion angle and pump shaft angle on the hydraulic performance of slanted outlet conduit were respectively studied. The results indicate that the larger the height of the slanted inlet conduit, the better the conduit hydraulic performance; the smaller the angle of pump shaft, the better the conduit hydraulic performance; the smaller the turn angle of inlet conduit is, the smaller the influence of centrifugal force is, and the more advantageously the flow adjusts; the smaller the diffusion angle of slanted outlet conduit, the better the conduit hydraulic performance, the larger the angle of pump shaft, the better the conduit hydraulic performance; affected by both the spiral flow and the S-shaped curving conduit which turns sharply, the asymmetric vortex exists inevitably in slanted outlet conduit; comprehensive consideration on the various factors of Babao Pumping Station such as conduit hydraulic performance, civil engineering quantity, hoisting height of sluice gate and installation and maintenance difficulty of pumping unit, the angle of pump shaft is determined as 20° for the slanted pump system of the station.
|
|
Received: 26 September 2017
|
|
|
|
| [1]徐磊, 刘荣华, 陈伟, 等. 3种泵轴倾角斜式进水流道水力性能的比较[J]. 水力发电学报, 2011, 30(2): 128-132. XU Lei, LIU Ronghua, CHEN Wei, et al. Comparison of hydraulic performances of three slanting inlet conduits with different angles of pump shaft [J]. Journal of hydroelectric engineering, 2011, 30(2): 128-132.(in Chinese)[2]李世掌. 大型斜30°轴流泵机组结构与安装方法探讨[J]. 山西建筑, 2010, 36(26): 334-335. LI Shizhang. On large-scale 30 degree slantwise axial flow pump structure and its installation methods [J]. Shanxi architecture, 2010, 36(26): 334-335.(in Chinese)[3]蔡宏伟, 潘利国. 杭州三堡排涝工程水泵选型分析[J]. 浙江水利科技, 2011(3): 28-30. CAI Hongwei, PAN Liguo. Pump selection analysis of Hangzhou Sanbao drainage project [J]. Zhejiang hydrotechnics, 2011(3): 28-30.(in Chinese)[4]李康波, 梁世皎. 新技术在文头岭泵站设计中的应用[J]. 广东水利水电, 2010(1): 40-42. LI Kangbo, LIANG Shijiao. Application of new techno-logy in the design of Wentouling Pumping Station [J]. Guangdong water resources and hydropower, 2010(1): 40-42.(in Chinese)[5]黄健勇, 张飞珍, 张浩, 等. 斜式轴流泵装置进水流道的正交优化设计[J]. 排灌机械工程学报, 2013, 31(9): 741-746. HUANG Jianyong, ZHANG Feizhen, ZHANG Hao, et al. Design optimization of inlet conduit in slanted axial-flow pump installation by orthogonal array experiment [J]. Journal of drainage and irrigation machinery engineering, 2013, 31(9): 741-746.(in Chinese)[6]周正富, 陈松山, 何钟宁, 等. 斜式轴流泵装置模拟计算研究[J]. 中国农村水利水电, 2009(4): 65-68. ZHOU Zhengfu, CHEN Songshan, HE Zhongning, et al. Research on numerical simulation of slant shaft pump system [J]. China rural water and hydropower, 2009(4): 65-68.(in Chinese)[7]刘君, 郑源, 周大庆, 等. 大型斜式轴流泵装置能量特性研究[J]. 流体机械, 2010, 38(1): 1-4. LIU Jun, ZHENG Yuan, ZHOU Daqing, et al. Study on energy characteristics of large-scale inclined axial-flow pump arrangement [J]. Fluid machinery, 2010, 38(1): 1-4.(in Chinese)[8]王亮, 陈松山, 周正富, 等. 45°斜式轴流泵装置的流动特性分析与实验[J]. 水利与建筑工程学报, 2013, 11(5): 149-152. WANG Liang, CHEN Songshan, ZHOU Zhengfu, et al. Analysis and test for flow characteristics of 45° slanting axial flow pumping system [J]. Journal of water resources and architectural engineering, 2013, 11(5): 149-152.(in Chinese)[9]何钟宁, 周正富, 谈强, 等. 15°斜轴泵装置特性试验[J]. 排灌机械, 2008, 26(6): 36-40. HE Zhongning, ZHOU Zhengfu, TAN Qiang, et al. Characteristic test of 15°slanting axis pump set [J]. Drainage and irrigation machinery, 2008, 26(6): 36-40.(in Chinese)[10]刘润根, 马晓忠, 詹磊. 黄家坝30°斜式轴流泵装置模型试验研究[J]. 中国农村水利水电, 2016(2): 109-111. LIU Rungen, MA Xiaozhong, ZHAN Lei. Model test of axial flow pump system with 30°slant shaft for Huangjiaba Pumping Station [J]. China rural water and hydropower, 2016(2): 109-111.(in Chinese)[11]金国栋, 潘志军, 孟金波, 等. 斜式轴流泵装置模型的飞逸特性研究[J]. 水动力学研究与进展, 2013, 28(5): 591-596. JIN Guodong, PAN Zhijun, MENG Jinbo, et al. Study of the runaway character of slanted axial-flow pump [J]. Chinese journal of hydrodynamics, 2013, 28(5): 591-596.(in Chinese)[12]陆林广. 高性能大型低扬程泵装置优化水力设计[M]. 北京: 中国水利水电出版社, 2013: 33.[13]刘宁, 汪易森, 张纲. 南水北调工程水泵模型同台测试[M]. 北京: 中国水利水电出版社, 2006.[14]LI Yaojun, WANG Fujun. Numerical Investigation of performance of an axial-flow pump with inducer [J]. Journal of hydrodynamics, 2007, 19(6): 705-711.[15]JAFARZADEH B, HAJARI A, ALISHAHI M M, et al. The flow simulation of a low-specific-speed high-speed centrifugal pump [J]. Applied mathematical modelling, 2010(5): 242-249.[16]CONSTANTINESCU G S, PATEL V C. Numerical mo-del for simulation of pump-intake flow and vortices[J].Journal of hydraulic engineering, 1998, 124(2): 123-134.[17]RODI W. Turbulence models and their application in hydraulics experimental and mathematical fluid dyna-mics [M]. Delft: IAHR Section on Fundamentals of Division Ⅱ, 1980: 44-46.[18]陆林广, 吴开平, 冷豫, 等. 泵站出水流道模型水力损失的测试[J]. 排灌机械, 2005, 23(5): 23-26. LU Linguang, WU Kaiping, LENG Yu, et al. Measurement for hydraulic loss of outlet conduit of pumping station [J]. Drainage and irrigation, 2005, 23(5): 23-26.(in Chinese)[19]中华人民共和国水利部. 泵站设计规范GB 50265—2010[S]. 北京: 中国计划出版社, 2011. |
|
|
|
