|
|
|
| Effects of support structure on lubricating properties of bidirectional thrust bearings |
| HUANG Bin, WU Jun-Ling, WU Zhong-De, JIAO Lei, Wang-Le-Qin |
| (1.Institute of Chemical Machinery Engineering, Zhejiang University, Hangzhou, Zhejiang 310027, China; 2.Department of Electrical Machinery, Harbin Institute of Large Electrical Machinery, Harbin, Heilongjiang 150040, China) |
|
|
|
|
Abstract A threedimensional thermoelastichydrodynamic mathematical model of thrust bearing was set up and the boundary conditions was adopted for analysis of the effects of support structure on hydrodynamic lubrication performance of bidirectional thrust bearing in pumpturbine. The finite difference method was employed to solve the THD model, and the thermalelastic deformations in the pad were obtained by the finite element software ANSYS11.0. The data transfer between the THD model and ANSYS11.0 was carried out automatically by an interface program. The calculation model set up in this paper was then applied to a calculating example. The oil film thickness distribution, oil film pressure distribution and pad temperature distribution were obtained. Good agreement between the theoretical calculating results and experimental test was obtained. On this basis, the static performance distribution and thermoelastic deformation distribution on the pad surface of three different support disks were analyzed. The results show that improving lubricant performance can be obtained if the support structure is chosen correctly, and the thermoelastic deformation distribution on the pad surface of cutting away disk or doubledisk supported thrust bearing are better than the singledisk one, which leads to prior lubricant performance.
|
|
Received: 17 May 2012
Published: 30 November 2012
|
|
|
|
| ［1］罗正平. 双向推力轴承研究［J］. 东方电机评论, 2002, 16(4):208-212.Luo Zhengping. Study on centrally supporting thrust bearing［J］.Dongfang Electric Review,2002,16(4): 208-212.(in Chinese)［2］程云山. 水泵水轮机弹性盘支承推力轴承烧损事故分析及处理［J］.水利水电科技进展, 2007, 27(5):59-61.Cheng Yunshan. Analysis and treatment of elastic shaftdisc thrust bearing burnout accident of pumpturbines［J］.Advances in Science and Technology of Water Resources, 2007, 27(5):59-61. (in Chinese)［3］吴超, 王文, 陈晓阳,等. 推力轴承支承方式及间隙影响研究［J］.润滑与密封, 2006, 177(5):130-131.Wu Chao, Wang Wen, Chen Xiaoyang, et al. The influence of supporting pattern and oil film clearance on hydrodynamic thrust bearing［J］.Lubrication Engineering, 2006, 177(5):130-131. (in Chinese)［4］罗正平. 水轮发电机推力轴承支承结构性能的研究［J］. 东方电机评论, 2000, 14(3):142-147.Luo Zhengping. Study on performance of hydrogenerator’s thrust bearing with different support structure［J］.Dongfang Electric Review,2000, 14(3):142-147. (in Chinese)［5］Glavatskih S B, Fillon M.TEHD analysis of thrust bearings with PTFEFaced pads［J］.Journal of Tribology,2006, 128(1):49-58.［6］Yuan Xiaoyang, Zhu Jun,Chen Zhilan, et al. A threedimensional TEHD model and an optimum surface profile design of pivoted pad thrust bearings with large dimensions［J］.Tribology Transactions, 2003, 46(2):153-160.［7］Michal Wasilczuk, Michal Wodtke. Influence of collar deformations on hydrodynamic thrust bearing performance［C］／／2007 Proceedings of the ASME／STLE International Joint Tribology Conference.San Deigo:［s.n.］, 2008.［8］吴军令, 武中德, 孙玉田, 等. 双向推力轴承试验研究［J］. 大电机技术, 2005 (1):1-5.Wu Junling, Wu Zhongde, Sun Yutian, et al.Test study of bidirectional thrust bearing［J］.Large Electric Machine and Hydraulic Turbine, 2005 (1):1-5.(in Chinese)［9］乐再元. 双托盘支承钨金瓦推力轴承的试验研究［J］. 东方电机, 1996(3):24-28.Le Zaiyuan. Experimental research on two disk supporting tungalloy pad thrust bearings［J］. Dongfang Electrical Machine, 1996(3): 24-28.(in Chinese) |
|
|
|
