|
|
|
| Numerical analysis of slipper bearing′s film shape in axial piston pump using genetic algorithms |
| LIU Hong, PENG Zeng-Xiong, JING Chong-Bo |
| (National Key Laboratory of Vehicular Transmission,Beijing Institute of Technology,Beijing 100081,China) |
|
|
|
|
Abstract The film shape of slipper bearing has a great influence on its lubrication characteristics in axial piston pumps.In order to calculate the slipper lubrication characteristics correctly,the film shape should be obtained precisely.Firstly,considering the slipper overturn phenomenon,the film shape was described by using nonuniform gap,and the lubrication equation of the slipper was established and solved by the GaussSeidel relaxation method to obtain its pressure field.Then an optimization problem,which consists of two decision variables,one objective function,two equality constraints and two inequality constrains,was deduced for the film shape.The two equality constraints are based on the simplified normal force balance equation and flow rate continuity equation,which were obtained with equilibrium analysis of force on the slipper by considering the relation between the film shape and a corresponding pressure field.The two inequality constrains,the slipper tilt angle and azimuth angle were involved.Finally,the Niche Genetic Algorithm was applied to solve this problem.The results showed that this method is really robust and can achieve the optimum solution faster with a higher accuracy，and can get a steady 3D film shape of a slipper precisely.The method has provided a theoretical base for correct prediction of slipper lubrication characteristic and slipper bearing design.
|
|
Received: 09 May 2011
Published: 30 January 2012
|
|
|
|
| 参考文献(References)［1］何必海,孙健国,叶志锋.航空燃油柱塞泵滑靴静压润滑油膜计算分析［J］.航空动力学报,2009,24(12):2821-2827.He Bihai,Sun Jianguo,Ye Zhifeng.Calculation and analysis on film thickness of the slippers based on hydrostatic bearing in the aeronautical fuel piston pump［J］.Journal of Aerospace Power,2009,24(12):2821-2827.(in Chinese)［2］Sun Yi,Jiang Jihai,Zhou Yu.Analysis and simulation of the property of oil film of the slipper in axial piston pump［C］∥Proceedings of 2011 International Conference on Electronic and Mechanical Engineering and Information Technology.Piscataway,NJ,USA:［s.n.］,2011:1359-1362.［3］Bergada J M,Haynes J M,Watton J.Leakage and groove pressure of an axial piston pump slipper with multiple lands［J］.Tribology Transactions,2008,51(4):469-482.［4］Bergada J M,Watton J,Haynes J M,et al.The hydrostatic／hydrodynamic behaviour of an axial piston pump slipper with multiple lands［J］.Meccanica,2010,45(4):585-602.［5］Nie S L,Huang G H,Li Y P.Tribological study on hydrostatic slipper bearing with annular orifice damper for water hydraulic axial piston motor［J］.Tribology International,2006,39(11):1342-1354.［6］Koc E,Hooke C J.Considerations in the design of partially hydrostatic slipper bearings［J］.Tribology International,1997,30(11):815-823.［7］蒋金山,何春雄,潘少华.最优化计算方法［M］.广州:华南理工大学出版社,2007.［8］陶海坤,谭磊,曹树良.遗传算法的改进及其在流体机械领域的应用［J］.排灌机械工程学报,2010,28(5):428-433.Tao Haikun,Tan Lei,Cao Shuliang.Improvement on genetic algorithms and its application in fluid machinery［J］.Journal of Drainage and Irrigation Machinery Engineering,2010,28(5):428-433.(in Chinese)［9］郭涛,李国君,田辉,等.基于遗传算法的离心泵叶轮参数化造型及优化设计［J］.排灌机械工程学报,2010,28(5):384-388.Guo Tao,Li Guojun,Tian Hui,et al.Parametric modeling and optimization design of centrifugal pump impeller based on genetic algorithm［J］.Journal of Drainage and Irrigation Machinery Engineering,2010,28(5):384-388.(in Chinese)［10］雷英杰,张善文,李续武,等.Matlab遗传算法工具箱及应用［M］.西安:西安电子科技大学出版社,2005. |
|
|
|
