|
|
Comparative analysis between acceptance sampling by variable and byattributes for sprinkler and micro irrigation products |
Zhao Hua1,2, Xu Di1,2 |
(1.National Center of Efficient Irrigation Engineering and Technology Research, Beijing 100048, China; 2.China Institute of Water Resources and Hydropower Research, Beijing 100048, China) |
|
|
Abstract On condition that the risk of producer is as same as that of the consumer, with the example of sampling inspection for rotating sprinkler discharge consistency, the comparative analysis was carried out between acceptance sampling by variable and by attributes for the sprinkler and micro irrigation products. The results demonstrate that sample decrease ratio E, which is the sampling number decrease using inspection sampling by variable, is 25.0%~43.4% and 56.0%~67.6% in s and σ method on condition of lot size no less than 91 on general inspection level Ⅱ, and the larger lot size bring the greater E. If sprinkler and micro irrigation products meet the conditions of sampling by variable and by attributes at the same time, it is better to adopt variable sampling in the purpose of decreasing sampling number and reducing inspection cost.
|
Received: 04 March 2010
Published: 30 July 2010
|
|
|
|
[1]许迪,龚时宏,高本虎,等.中国节水灌溉产品质量现状分析及改善对策[J].农业工程学报,2004,20(5):6-11.Xu Di,Gong Shihong,Gao Benhu,et al.Status analysis of the quality of China's efficient irrigation products and perfecting countermeasures[J].Transactions of the CSAE,2004,20(5):6-11.(in Chinese)[2]中国国家质量监督检验检疫总局,中国国家标准化管理委员会.GB/T 2828.1-2003 计数抽样检验程序第1部分:按接收质量限(AQL)检索的逐批检验抽样计划[S].北京:中国标准出版社,2003.[3]中国国家质量监督检验检疫总局,中国国家标准化管理委员会.GB/T 19795.1-2005 农业灌溉设备旋转式喷头第1部分:结构和运行要求[S].北京:中国标准出版社,2005.[4]中国国家质量监督检验检疫总局,中国国家标准化管理委员会.GB/T 19812.2-2005 塑料节水灌溉器材:压力补偿式滴头及滴灌管[S].北京:中国标准出版社,2005.[5]中国国家质量监督检验检疫总局,中国国家标准化管理委员会.GB/T 10002.1-2006 给水用硬聚氯乙烯(PVC-U)管材[S].北京:中国标准出版社,2005.[6]TC 69/SC 5.ISO 3951-1:2005 Sampling procedures for inspection by variables-Part 1:Specification for single sampling plans indexed by acceptance quality limit(AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL[S].Switzerland:ISO Copyright Office,2005.[7]Pendrill L R.Optimised measurement uncertainty and decision-making when sampling by variables or by attribute[J].Measurement,2006,39(9):829-840.[8]张玉柱,张士军,曹世民.计量调整型抽样检验系统GB/T 6378-1986与ISO 3951:1989的比较分析[J].数理统计与管理,2004,24(6):39-41.Zhang Yuzhu,Zhang Shijun,Cao Shimin.The comparison and analysis of adjusting sampling systems GB/T 6378-1986 and ISO 3951:1989[J].Application of Statistics and Management,2004,24(6):39-41.(in Chinese)[9]中国建筑材料工业协会.JC/T 590-2005 过滤用玻璃纤维针刺毡[S].北京:中国建材工业出版社,2005.[10]李剑杰,孙义泰.GB/T 6378计量抽样检验在玻璃纤维行业中的应用[J].玻璃纤维,2003(5):26-28.Li Jianjie,Sun Yitai.Adoption of GB/T 6378 sampling inspection by variables in fiberglass industry[J].Fiber Glass,2003 (5):26-28.(in Chinese)[11]童杨微.水表质量检验中两种抽样检验方法的比较[J].武汉水务,2009(3):59-61.Tong Yangwei.The comparison of two kind acceptance sampling methods for water meter quality inspection[J].Wuhan Water Affair,2009(3):59-61.(in Chinese)[12]Kaya I,Engin O.A new approach to define sample size at attributes control chart in multistage processes:an application in engine piston manufacturing process[J].Journal of Materials Processing Technology,2007,183(1):38-48.[13]肖慧,张玉柱.GB/T 2828.1-2003《计数抽样检验程序第1部分:按接受质量限(AQL)检索的逐批检验抽样计划》理解与实施[M].北京:中国标准出版社,2003.[14]全国统计方法应用标准化技术委员会.GB/T 6378-2002 不合格品率的计量抽样检验程序及图表[S].北京:中国标准出版社,2002.[15]Bruhn-Suhr M,Krumbholz W.A new variables sampling plan for normally distributed lots with unknown standard deviation and double specification limits[J].Statistical Papers,1990,31(1):195-207.[16]Schilling E G,Neubauer D V.Acceptance Sampling in Quality Control[M].2nd ed.Boca Raton:CRC Press,2009.[17]全国统计方法应用标准化技术委员会第七分会.GB/T 15932-1995 非中心t分布分位数表[S].北京:国家技术监督局,1995.[18]薛定宇,陈阳泉.高等应用数学问题的MATLAB求解[M].北京:清华大学出版社,2004. |
[1] |
HAN Yang,, CHANG Di,, HUANG Zhongdong,, LI Ping,, LIANG Zhijie,, QI Xuebin,*. Spatial-temporal distribution characteristics of reference crop evapotranspiration and climate influence factors in Henan Province[J]. Journal of Drainage and Irrigation Machinery Engin, 2018, 36(9): 812-818. |
|
|
|
|