|
|
Numerical realization of Francis turbine blade design and wooden patterns |
QI Xue-yi, DING Si-yun, LI Hui-nuan, YAN Xiao-wei, FENG Er-tong |
Lanzhou University of Technology, Lanzhou, Gansu 730050, China |
|
|
Abstract In the design of Francis turbine runner blade,with the traditional method such as conformal transformation,the design period is quite long and the blade model making is very difficult.In this study the design of the turbine runner blade is improved by integrating the blade mean camberline equation,thickening the blades along the blade mean camberline in flow surface calculation and using the CAD system to draft the wooden patterns of the turbine runner blade.From the wooden patterns it shows that this design method is more optimized and meets the requirement of design better.The shape of runner blade is conformed to the practical one well.It can be used to analyze the the performance of Francis turbine,and to make the wooden patterns machining easier in using programs of numerical controlled machining.
|
Received: 08 August 2013
|
|
|
|
[1] 谭恢村.水轮机转轮叶片的数据拟合研究与工程应用[J].大电机技术,1991,95(2):47-50[2] 曹鹍,姚志民.水轮机原理及水力设计[M].北京:清华大学出版社,1991:164-166[3] 李有法.数值计算方法[M].北京:高等教育出版社,2004[4] 侯祎华,齐学义,常一乐.基于PRO/E的水轮机转轮三维造型[J].排灌机械,2006,24(1):14-16[5] 蒋大为.复杂曲面的B样条拟合方法[J].航空计算技术,1999,29(2):23-26[6] 杨楠渝.水轮机叶片的NURBS曲线曲面造型问题研究[D].西安:西安理工大学,1999[7] Demeulenaere A,Van den Braembussche R.Three-Dimensional Invere Method for Turbomachinery Blading Design[J].Journal of Turbomachinery,Transactions of the ASME,1998,120:247-255[8] 刘胜柱,郭鹏程,纪兴英.混流式水轮机叶片进出水边外延方法[J].中国农村水利水电,2004(12):114-115[9] 张人会,杨军虎.基于样条曲线的水泵叶片流线控制方法[J].排灌机械,2005,23(1):7-9[10] 王萍,陈月林.混流式水轮机转轮CAD[J].上海工程技术大学学报,1998,12(1):66-70[11] 钱涵欣.水轮机转轮叶片加厚及木模图绘制的计算机辅助设计[J].动力工程,1994,14(3):6-10[12] 余波,张勤.混流式水轮机转轮叶片加厚的数值方法[J].四川水力发电,1997,16(3):83-85 |
|
|
|