|
|
|
| Pump-turbine runner design and flow simulation based on inverse design method |
| Yang Guoying1,2, Feng Chenran3 |
| 1.School of Energy and Power Engineering, Lanzhou University of Technology, Lanzhou, Gansu 730050, China; 2.Students′ Affairs Division, Lanzhou Petrochemical College of Vocational Technology, Lanzhou, Gansu 730060, China; 2.School of Petrochemical Technology, Lanzhou University of Technology, Lanzhou, Gansu 730050, China |
|
|
|
|
Abstract As pump-turbines are usually subject to a poorer efficiency, through drawing lessons from the blade design principle for low specific speed Francis turbines, the blades in a pump-turbine runner were designed by using inverse design method under given design duty parameters, and then 3D modeling and ICEM meshing were carried out. The flow field in the pump-turbine was simulated and the flow characteristics were identified by solving the RNG k-ε turbulence model and N-S equations in the relative coordinate system. The finite volume method was used to discrete fluid domain and SIMPLEC algorithm was applied to couple the N-S equations. The efficiency of the pump-turbine was predicted as well. A comparison of predicted and experimental pressure distribution has been conducted. The numerical results show that the best efficiency can reach as high as 91% with turbine mode and 82% with pump mode, respectively. This demonstrates that the inverse design method can take both pump and turbine modes into account in hydraulic design to make a pump-turbine be operated in a relatively optimal condition.
|
|
Received: 20 December 2012
|
|
|
|
| [1]梅祖彦.抽水蓄能发电技术[M].北京:机械工业出版社,2000:105-135.[2]曹鵾,姚志民.水轮机原理及水力设计[M].北京:清华大学出版社,1991.[3]齐学义.关于提灌——发电可逆机转轮水力设计的初步探讨[J].甘肃工业大学学报, 1981(2):75-86. Qi Xueyi. About irrigation—generating machine runner reversible hydraulic design preliminary study[J]. Journal of Gansu University of Technology, 1981(2):75-86.[4]肖若富, 孙卉, 刘伟超, 等. 预开导叶下水泵水轮机S特性及其压力脉动分析[J]. 机械工程学报, 2012,48(8):174-179. Xiao Ruofu, Sun Hui, Liu Weichao, et al. Analysis of S characteristics and its pressure pulsation of pump-turbine under pre-opening guide vanes[J]. Journal of Mechanical Engineering, 2012,48(8):174-179.(in Chinese)[5]杨琳,陈乃祥,樊红刚. 水泵水轮机转轮全三维逆向设计方法[J]. 清华大学学报:自然科学版,2005,45(8):1118-1121. Yang Lin, Chen Naixiang, Fan Honggang. Three-dimensional reverse design method for pump-turbine runners[J]. Journal of Tsinghua University: Science and Technology, 2005,45(8):1118-1121.(in Chinese)[6]李仁年, 苏发章. 水轮机活动导叶的耐磨设计及实验研究[J]. 水动力学研究与进展:A辑, 2003,18(4):446-449. Li Rennian, Su Fazhang. Abrasion protection design and experimental study of wicket gate of hydraulic turbines[J]. Journal of Hydrodynamics:Ser A, 2003,18(4):446-449.(in Chinese)[7]Hellström J G I, Marjavaara B D, Lundström T S. Para-llel CFD simulations of an original and redesigned hydraulic turbine draft tube[J]. Advances in Engineering Software, 2007,38(5):338-344.[8]Escaler X, Egusquiza E, Farhat M, et al. Detection of cavitation in hydraulic turbines[J]. Mechanical Systems and Signal Processing, 2006,20(4):983-1007.[9]Izena A, Kihara H, Shimojo T, et al. Practical hydraulic turbine model[C]//2006 IEEE Power Engineering Society General Meeting, PES. Piscataway, NJ, USA: Inst of Elec and Elec Eng Computer Society, 2006:3837-3843.[10]王乐勤, 刘锦涛, 梁成红, 等. 水泵水轮机水轮机制动区的流动特性[J]. 排灌机械工程学报, 2011, 29(1):1-5. Wang Leqin, Liu Jintao, Liang Chenghong, et al. Flow characteristics of pump-turbine at turbine braking mode[J]. Journal of Drainage and Irrigation Machinery Engineering, 2011,29(1):1-5.(in Chinese) |
|
|
|
