|
|
|
| Effects of guide cone configuration on hydraulic performance of low-head pumping station |
| Zhou Peijian1, Wang Fujun1, Zhang Zhimin2 |
| 1.College of Water Resources & Civil Engineering, China Agricultural University, Beijing 100083, China; 2.Tianjin Institute of Hydroelectric and Power Research, China Institute of Water Resources and Hydropower Research, Tianjin 301900, China |
|
|
|
|
Abstract In order to investigate effects of guide cone on hydraulic performance of low-head pumping station, five different guide cone configurations, namely straight, hyperbolic, quadratic, arc and elliptical cones are designed for Xinkaihe Pumping Station. The 3D flow field in the flow passages accommodating an axial-flow pump in that station is simulated by employing CFD method. It is turned out that the guide cone has a large effect on flow pattern in the pump sump. All the guide cones can prevent the occurrence of the floor-attached vortices in the pump sump. For the straight, hyperbolic, pa-rabolic and arc cones, one sidewall-attached vortex and two free surface vortices emerge. For elliptical cone, however, only one sidewall-attached vortex and a free surface vortex are identified. Comparing with the case without guide cone, the elliptical cone has reduced the number of vortices. Additionally, guide cones also have a remarked effect on hydraulic loss in the pump sump. The hydraulic loss is the minimum for the sump with elliptical cone, but the loss for the rest cones is larger than the one without guide cone. Comparing the flow at the outlet of sump across the configurations by means of the axial velocity uniformity and velocity-weighted average swirl angle, it was shown the elliptical cone has the best rectification effect on flow. Finally, the hydraulic efficiency was analyzed for the flow passages with various guide cones, and it was demonstrated that the elliptical cone can result in an improved hydraulic efficiency compared with the others.
|
|
Received: 07 January 2013
|
|
|
|
| [1]王福军. 水泵与水泵站[M]. 2版. 北京: 中国农业出版社, 2011.[2]蔡坤,董瑾,曾正,等. 导流锥节能原理及设计安装[J]. 排灌机械, 1997,15(1):20-24. Cai Kun, Dong Jin, Zeng Zheng, et al. Principle of diversion cone′s economize on energy and its design and installing[J]. Drainage and Irrigation Machinery, 1997,15(1):20-24.(in Chinese)[3]Tang X L, Wang F J, Li Y J, et al. Numerical investigations of vortex flows and vortex suppression schemes in a large pumping-station sump[J]. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2011,225(6):1459-1480.[4]Ahmad Z, Jain B, Kumar S, et al. Rational design of a pump-sump and its model testing[J]. Journal of Pipeline Systems Engineering and Practice, 2010,2(2):53-63.[5]郭加宏,陈红勋. 泵站水泵进水池内防涡装置有效性的数值验证[J]. 工程热物理学报, 2005, 26(S):85-88. Guo Jiahong, Chen Hongxun. Verification of the validity of a kind of swirl-proof device in the sump of pump stations by numerical simulation[J]. Journal of Enginee-ring Thermophysics, 2005,26(S):85-88.(in Chinese)[6]Isbasoiu E C, Muntean T, Safta C A, et al. Swirling flows in the suction sumps of vertical pumps. Theoretical approach[C]//Proceedings of the Workshop on Vortex Dominated Flows. Achievements and Open Problems, 2005:17-22.[7]Kang W-T, Yu K H, Lee S Y, et al. An investigation of cavitation and suction vortices behavior in pump sump[C]//Proceedings of ASME-JSME-KSME Joint F-luids Engineering Conference, 2011:1-6.[8]Cheng Li, Luo Can, Liu Chao. Numerical simulation of relationship between flow pattern and hydraulic perfor-mance of tubular pump[C]//Proceedings of ASME 2011 International Mechanical Engineering Congress and Exposition, 2011,6(Parts A and B):793-799.[9]Wang Fujun, Li Yaojun, Cong Guohui, et al. CFD si-mulation of 3D flow in large-bore axial-flow pump with half-elbow suction sump[J]. Journal of Hydrodynamics, Ser B, 2006, 18(2):243-247.[10]王福军. 计算流体动力学分析——CFD 软件原理与应用[M]. 北京:清华大学出版社, 2004.[11]Zhang Desheng, Shi Weidong, Chen Bin, et al. Unsteady flow analysis and experimental investigation of axial-flow pump[J]. Journal of Hydrodynamics, Ser B, 2010,22(1): 35-43.[12]中国农业大学. 高效率、高汽蚀性能轴流泵水力模型在泵站技术改造中的应用——CFD研究报告[R]. 北京:中国农业大学水利与土木工程学院,2011.[13]陆林广,张仁田. 泵站进水流道优化水力设计[M]. 北京: 中国水利水电出版社, 1997:18-19.[14]朱红耕, 袁寿其, 刘厚林. 肘形进水流道对立式轴流泵水力性能影响的数值模拟[J]. 农业工程学报, 2006,22(2): 6-9. Zhu Honggeng,Yuan Shouqi,Liu Houlin. Numerical simulation of the influence of elbow inlet passages on the hydraulic characteristics of vertical axial-flow pumps[J]. Transactions of the CSAE, 2006,22(2):6-9.(in Chinese) |
|
|
|
