两种双腔串联压电泵结构设计与性能比较

doi:10.3969/j.issn.1674-8530.2011.01.007

Abstract
Figure/Table
References
Related Citation (13)

Download: PDF (389 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract In order to research structure effect on output performance of piezoelectric pump with two chambers in series, two structural forms of piezoelectric pump with two chambers in series with a diversion and no diversion slot were designed according to its working principle. The experimental samplers were manufactured and output performance experiments were carried out with water and air as the medium, respectively. The experimental results show that output flow rate of piezoelectric pump with two chambers in series with a diversion slot is better by powered 110 V sinusoidal AC drive voltage. The maximum output of liquid and gas flow rate are 1 100 mL／min and 650 mL／min, respectively, but residual bubble in the diversion slot is its disadvantage. Both the overall output pressure are closer and maximum output pressure reaches to 100 kPa. The self-priming performance of pump with no diversion slot is better and the largest self-priming water column height is 45 cm.

Key words：

piezoelectric pump two chambers in series structural design diversion slot

Received: 03 February 2010 Published: 30 January 2011

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	SUN Xiao-Feng
	Yang-Zhi-Gang
	Jiang-De-Long

Cite this article:

SUN Xiao-Feng,Yang-Zhi-Gang,Jiang-De-Long. Structural design and performance comparison of two kinds of piezoelectric pump with two chambers in series[J]. Journal of Drainage and Irrigation Machinery Engin, 2011, 29(1): 31-34.

URL:

http://zzs.ujs.edu.cn/pgjx/EN/10.3969/j.issn.1674-8530.2011.01.007 OR http://zzs.ujs.edu.cn/pgjx/EN/Y2011/V29/I1/31

[1]Laser D J,Santiago J G.A review of micropumps[J].Journal of Micromechanics and Microengineering,2004,14(6):35-64.

[2]Kim Jinho,Kang C J,Kim Yongsang.A disposable polydimethylsiloxane-based diffuser micropump actuated by piezoelectric-disc[J].Microelectronic Engineering,2004,71(2):119-124.

[3]阚君武,杨志刚,刘品宽.两腔体串联压电驱动微型泵的输出特性[J].哈尔滨工业大学学报,2004,36(10):1347-1350.Kan Junwu,Yang Zhigang,Liu Pinkuan.Performance of a double-chamber serial piezoelectric micropump[J].Journal of Harbin Institute of Technology,2004,36(10):1347-1350.(in Chinese)

[4]孙晓锋,李欣欣,杨志刚.带整体开启阀的双腔串联压电薄膜泵[J].吉林大学学报:工学版,2006,36(4):529-533.Sun Xiaofeng,Li Xinxin,Yang Zhigang.Piezoelectric membrane pump with aeries-connected double chambers and holistie opening valve[J].Journal of Jilin University:Engineering and Technology Editwn,2006,36(4):529-533.(in Chinese)

[5]何秀华,张睿,蒋权英.基于MEMS的压电泵及其研究进展[J].排灌机械,2007,25(4):64-68.He Xiuhua,Zhang Rui,Jiang Quanying.Progress on piezoelectric micropump based on MEMS[J].Drainage and Irrigation Machinery,2007,25(4):64-68.(in Chinese)

[6]Kan Junwu,Tang Kehong,Liu Guojun.Development of serial-connection piezoelectric pumps[J].Sensors and Actuators,2008,144(2):321-327.

[7]杨志刚,孙晓锋,张德君.双腔串联两阀与三阀压电泵的性能研究[J].光学精密工程,2007,15(2):219-223.Yang Zhigang,Sun Xiaofeng,Zhang Dejun.Performance research on double-valved and three-valved piezoelectric pumps with double series-wound chambers[J].optics and Precision Engineering,2007,15(2):219-223.(in Chinese)

[8]何秀华,张睿."V"形无阀压电泵理论分析与数值模拟[J].排灌机械,2008,26(4):30-34.He Xiuhua,Zhang Rui.Theoretical analysis and numerical simulation of valveless piezoelectric pump with Vshape tube[J].Drainage and Irrigation Machinery,2008,26(4):30-34.(in Chinese)

[9]Wang Q S,Quek C T,Sun T,et al.Analysis of piezoelectric coupled circular plate[J].Smart Materials and Structures,2001,10(2):229-239.

[10]Minqiang B,Tracy M,Graham E,et al.Design and theoretical evaluation of a novel microfluidic device to be used for PCR[J].Journal of Micromechanics and Microengineering,2003,13(4):125-130.