|
|
Research progress in rotating stall in mixed-flow pumps with guide vane |
LI Wei1,2*, PING Yuanfeng1,2, SHI Weidong3, JI Leilei1,2, LI Enda1,2, MA Lingling1,2 |
1. National Research Center of Pumps, Jiangsu University, Zhenjiang, Jiangsu 212013, China; 2. Institute of Fluid Engineering Equipment, JITRI, Zhenjiang, Jiangsu 212009, China; 3. College of Mechanical Engineering, Nantong University, Nantong, Jiangsu 226019, China |
|
|
Abstract Rotating stall is a widespread unstable phenomenon of internal flow in rotodynamic machines, such as mixed-flow pumps and so on, and has a vital influence on performance and even safety of the machines. In this paper, manifestation, inception, formation and propagation mechanisms of the rotating stall are analyzed in terms of performance curve, internal flow structure and pressure fluctuation characteristics in both time and frequency domains in mixed flow pumps with guide vane. A few key factors affecting formation and development of the stall are discussed. Typical manifestations for the rotating stall occurrence in mixed-flow pumps with guide vane include positive slope(saddle shape)in various forms in the head-flow rate curve, and periodically propagating vortex structure in the internal flow field. The unsteady vortex structure can result in a blockage in the flow passages, and subsequently lead to unstable pressure fluctuation. The analysis of leakage vortex morphological structure and motion trajectory provides a new idea for the study on the stall inception in a mixed-flow pump with guide vane. Flow condition is the most direct factor leading to the rotating stall in the pump, especially, the number of stall cells will be impacted significantly with decreasing flow rate. In addition, the number of blades, impeller speed and tip clearance are also the important factors affecting number, propagation speed and development process of stall cells. Based on the research status in rotating stall in recent years in China and abroad, the issue and orientation for further research in the stall in mixed-flow pumps with guide vane in the future are put forward.
|
Received: 24 April 2018
|
|
|
|
[1]LI W, ZHOU L, SHI WD, et al. PIV experiment of the unsteady flow field in mixed-flow pump under part loa-ding condition[J]. Experimental thermal and fluid science, 2017, 83:191-199.[2]袁寿其,刘厚林. 泵类流体机械研究进展与展望[J]. 排灌机械,2007, 25(6):46-51. YUAN Shouqi, LIU Houlin. Progress and prospect of pump fluid machinery research[J]. Drainage and irrigation machinery, 2007, 25(6):46-51.(in Chinese)[3]李伟,季磊磊,施卫东,等. 基于准稳态假设的混流泵启动特性分析[J]. 农业工程学报,2016,32(7):86-92. LI Wei, JI Leilei, SHI Weidong, et al. Analysis of starting characteristics of mixed flow pump based on quasi steady state assumption[J]. Transactions of the CSAE, 2016,32(7):86-92.(in Chinese)[4]常书平, 王永生. 基于CFD的混流泵空化特性研究[J]. 排灌机械工程学报, 2012, 30(2):171-175. CHANG Shuping, WANG Yongsheng. Study on cavita-tion characteristics of mixed flow pump based on CFD[J]. Journal of drainage and irrigation machinery engineering, 2012, 30(2):171-175.(in Chinese)[5]XU Yun, TAN Lei, LIU Yabin, et al. Pressure fluctuation and flow pattern of a mixed-flow pump with different blade tip clearances under cavitation condition[J]. Advances in mechanical engineering, 2017: https://doi.org/10.1177/1687814017696227.[6]ZHANG W, YU Z, ZHU B. Influence of tip clearance on pressure fluctuation in low specific speed mixed-flow pump passage[J]. Energies, 2017, 10(2):148.[7]SUNDSTRÖM E, SEMLITSCH B, MIHĂESCU M. Generation mechanisms of rotating stall and surge in centrifugal compressors[J]. Flow turbulence and combustion, 2018, 100(3):705-719.[8]MIKHAILOV A E, MIKHAILOV A B, AKHMETOV Y M, et al. Simulation of gas turbine engines considering the rotating stall in a compressor [J]. Procedia engineering, 2017, 176:207-217.[9]ZHANG Y, WU Y. A review of rotating stall in reversible pump turbine[J]. Journal of mechanical engineering science, 2016, 231(7):1181-1204.[10]EMMONS H W, PEARSON C E, GRANT H P. Compressor surge and stall propagation[J]. Transactions of the ASME, 1955, 77(3): 455-469.[11]HU F F, PENG W, WU D Z, et al. Numerical study on the stall behavior of a water jet mixed-flow pump[J]. Journal of marine science & technology, 2014, 19(4):438-449.[12]李俊杰. 混流泵正斜率性能曲线机理及抑制研究[D]. 镇江:江苏大学, 2012.[13]MIYABE Masahiro, MAEDA Hideaki, UMEKI Isamu, et al. Unstable head-flow characteristic generation mechanism of a low specific speed mixed how pump[J]. Journal of thermal science, 2006, 15(2):115-120.[14]潘中永, 李俊杰, 李红, 等. 叶片泵旋转失速的研究进展[J]. 流体机械, 2011, 39(2):35-39. PAN Zhongyong, LI Junjie, LI Hong, et al. Research progress on rotating stall of vane pump[J]. Fluid machinery, 2011, 39(2):35-39.(in Chinese)[15]黎义斌, 李仁年, 王秀勇,等. 混流泵内部流动不稳定特性的数值模拟[J]. 排灌机械工程学报, 2013, 31(5):384-389. LI Yibin, LI Rennian, WANG Xiuyong, et al. Nume-rical simulation of unsteady flow in mixed flow pump[J]. Journal of drainage and irrigation machinery engineering, 2013, 31(5):384-389.(in Chinese)[16]LI Xiaojun, YUAN Shouqi, PAN Zhongyong, et al. Dynamic characteristics of rotating stall in mixed-flow pump[J]. Journal of applied mathematics, 2013:104629.[17]杜媛英, 高强, 尚长春,等. 基于大涡模拟的导叶式混流泵叶轮内压力脉动特性分析[J]. 西华大学学报(自然科学版), 2016, 35(4):75-78. DU Yuanying, GAO Qiang, SHANG Changchun, et al. Analysis of pressure fluctuation characteristics in impeller of mixed flow pump based on large eddy simulation[J]. Journal of Xihua University(natural science edition), 2016, 35(4):75-78.(in Chinese)[18]HASMATUCHI V. Hydrodynamics of a pump-turbine operating at off-design conditions in generating mode[D]. Lausanne, Switzerland:École Polytechnique Fédérale De Lausanne, 2012.[19]程晓斌. 小波分析与压气机旋转失速先兆研究[D]. 北京:中国科学院工程热物理研究所, 2000.[20]张明明, 李可仰, 董万静. 周期扰动下低压压气机旋转失速先兆辩识[J]. 推进技术, 2016, 37(5):871-878. ZHANG Mingming, LI Keyang, DONG Wanjing. Identification of rotating stall precursor of low pressure compressor under periodic disturbance[J]. Propulsion technology, 2016, 37(5):871-878.(in Chinese)[21]DIACONU A. Prediction of rotating stall and cavitation inception in pump turbines[C]//Proceedings of the IOP Conference Series: Earth and Environmental Science, 2010:012013.[22]GOLTZ I, KOSYNA G, STARK U, et al. Stall inception phenomena in a single-stage axial-flow pump[J]. Journal of power & energy, 2003, 217(4):471-479.[23]张磊, 王松岭, 胡晨星. 叶轮机械旋转失速研究进展[J]. 热力发电, 2014, 43(1):1-5. ZHANG Lei, WANG Songling, HU Chenxing. Research progress on rotating stall of impeller machinery[J]. Heat generate electricity, 2014, 43(1):1-5.(in Chinese)[24]潘中永, 李俊杰, 李晓俊,等. 混流泵不稳定特性及旋转失速研究[J]. 农业机械学报, 2012, 43(5):64-68. PAN Zhongyong, LI Junjie, LI Xiaojun, et al. Study on instability characteristics and rotating stall of diagonal flow pump[J]. Transactions of the CSAM, 2012, 43(5):64-68.(in Chinese)[25]MASAHIRO M, AKINORI F, HIDEAKI M, et al. Rotating stall behavior in a diffuser of mixed flow pump and its suppression [C] //Proceedings of the ASME 2008 Fluids Engineering Division Summer Meeting Collocated with the Heat Transfer, Energy Sustainability, and 3rd Energy Nanotechnology Conferences, 2008:1147-1152.[26]张春泽, 夏林生, 刁伟,等. 水泵水轮机泵工况旋转失速压力脉动特性及转动机理[J]. 水利学报, 2017, 48(7):837-845. ZHANG Chunze, XIA Lingsheng, DIAO Wei, et al. Characteristics and rotation mechanism of rotating stall pressure pulsation in pump turbine[J]. Journal of hydraulic engineering, 2017, 48(7):837-845.(in Chinese)[27]陆亚钧. 风机、叶片机中的旋转失速和喘振现象及分离旋涡流动[J]. 水利电力机械, 1992(5):22-46. LU Yajun. Rotating stall, surge and separation vortex flow in fan and vane machine[J]. Water conservancy and electric power machinery, 1992(5):22-46.(in Chinese)[28]周佩剑, 王福军, 姚志峰. 叶片数对离心泵叶轮失速特性影响研究[J]. 机械工程学报, 2016, 52(10):207-212. ZHOU Peijian, WANG Fujun, YAO Zhifeng. Influence of blade number of impeller on stall characteristics of centrifugal pump[J]. Journal of mechanical enginee-ring, 2016, 52(10):207-212.(in Chinese)[29]HLBOCAN P, MICHAL V. An impact of blade number of the mixed-flow pump on its characteristics[C]//Proceedings of the International Conference on the Application of Experimental and Numerical Methods in Fluid Mechanics and Energetics, 2012: 1-6.[30]邴浩, 谭磊, 曹树良. 叶片数及叶片厚度对混流泵性能的影响[J]. 水力发电学报, 2013, 32(6):250-255. BING Hao, TAN Lei, CAO Shuliang. Influence of blade number and blade thickness on performance of mixed flow pump[J]. Journal of hydroelectric engineering, 2013, 32(6):250-255.(in Chinese)[31]LENNEMANN E, HOWARD J H. Unsteady flow phenomena in rotating centrifugal impeller passages[J]. Journal of engineering for gas turbines and power, 1969, 92(1):65-71.[32]HASEMANN H, HAUPT U, JIN D, et al. Rotating stall flow and dangerous blade excitation of centrifugal compressor impeller: part 2—case study of blade failure[C]// Proceedings of the ASME 1991 International Gas Turbine and Aeroengine Congress and Exposition, 1991:V001T01A045.[33]BERTEN S, DUPONT P, FABRE L, et al. Experimen-tal investigation of flow instabilities and rotating stall in a high-energy centrifugal pump stage[C]//Proceedings of the FEDSM, 2009:505-513.[34]张睿. 轴流泵失速和空化流动特性及其性能改善研究[D]. 上海:上海大学, 2014.[35]BART E V, LI C. Unstable operation of a mixed-flow pump and the influence of tip clearance[C]//Proceedings of the ASME-JSME-KSME Joint Fluids Enginee-ring Conference, 2011:79-87.[36]马岩, 席光, 吴广宽. 小尺寸离心叶轮顶部间隙流动特性的数值模拟[C]//中国工程热物理学会论文集, 2011. |
|
|
|