|
|
Structural characteristics of ultrahigh-pressure multistage centrifugal pump typed SDZ310 |
CHEN Hongjun*, ZHANG Tiehan, WANG Changrong |
Chongqing Pump Industry Co. Ltd., Chongqing 400033, China |
|
|
Abstract Functioning as core equipment in high-pressure water systems, the ultrahigh-pressure multistage centrifugal pump(UPMCP)has been widely applied in industries such as metallurgy, chemical, petroleum and electric power sectors. However, there is a difficulty in axial thrust balance on the rotor in UPMCPsand the seals between stages are damaged easily after a long period of operation experienced currently. In this paper, Structural characters of UPMCPs for phosphorus removal were studied and analyzed, and then a axial thrust self-balanced type SDZ310 UPMCP with double case was developed. The impellers were symmetrically arranged on the pump rotor to make the axial thrust on the rotor self-balanced to extend pump life-span and strength the operation alliability of pump. In consequence, the difficult problem of balancing frequently varied axial thrust, which is caused from constantly variable operation condition in phosphorus removal services, has been solved.A centralized oil supply and return system with check valves has been integrated into the pump to meet the requirements of lubrication and cooling in long-time operation. The precisely grinded screw sealsof chrome platedwere adopted in the pump to guarantee no leakage between stages during operation. Therefore, the pump can maintain a sufficient high volumetric efficiency and subsequently a better total efficiency.
|
Received: 26 October 2016
|
|
|
|
[1]郑建华, 孙玉琢. 多级离心泵的轴向力研究[J]. 水泵技术, 1999(4):7-14. ZHENG Jianhua, SUN Yuzhuo. Studies on axial force of multistage centrifugal pump[J]. Pump technology, 1999(4):7-14.(in Chinese)[2]关醒凡, 张大恩, 张光兵, 等. 对称布置叶轮多级泵轴向力及平衡措施[J]. 水泵技术, 2012(4):1-3. GUAN Xingfan, ZHANG Daen, ZHANG Guangbing,et al. Axial force & balance measure of multistage pump with symmetrical arrangement impeller[J]. Pump technology, 2012(4):1-3.(in Chinese)[3]赵万勇, 王钊, 杨登峰, 等. 多级泵平衡盘动态平衡的理论研究[J]. 流体机械, 2012,40(9):35-38. ZHAO Wanyong, WANG Zhao, YANG Dengfeng, et al. Theoretical study on dynamic equilibrium of balance disc in multi-stage pump[J]. Fluid machinery, 2012,40(9): 35-38.(in Chinese)[3]宋怀德, 习宁刚, 马文瑛,等. 自平衡式高压多级输油泵的可靠性研究分析[J]. 流体机械, 2016, 44(5): 60-62. SONG Huaide, XI Ninggang, MA Wenying, et al. Reliability analysis of the self-balancing type high pressure multistage oil pump[J]. Fluid machinery, 2016, 44(5): 60-62.(in Chinese)[4]周哲波, 李明, 杨小娇, 等. 叶轮对称布置式多级泵轴向力平衡研究[J]. 煤矿机械, 2015(9):107-108. ZHOU Zhebo, LI Ming, YANG Xiaojiao, et al. Study on balance axial force of symmetrical arrangement of impeller multistage pump[J]. Coal mine machinery, 2015(9):107-108.(in Chinese)[5]朱正写, 杨新春, 金立新, 等. 多级泵的故障分析及处理[J]. 化工设备与管道, 2006,43(5):45-47. ZHU Zhengxie, YANG Xinchun, JIN Lixin, et al. Analysis and treatment of faults occurred in multi-stage pumps[J]. Process equipment & piping, 2016, 43(5): 45-47.(in Chinese)[6]迟秋立, 吴鑫山, 邢磊. 多级离心泵平衡盘鼓联合平衡装置设计探讨[J]. 流体机械, 2010,38(5):38-41. CHI Qiuli, WU Xinshan, XING Lei. Study for multistage centrifugal pump equilibrator design [J]. Fluid machinery, 2010,38(5):38-41.(in Chinese)[7]戴晓春, 赵德清. 多级离心泵轴向浮动支撑结构的研究与设计[J]. 流体机械, 2017, 45(5):42-45. DAI Xiaochun, ZHAO Deqing. Research and design of the combined supporting structure of floating sliding bearing and no-edge cylindrical roller bearing of multistage centrifugal pump [J]. Fluid machinery, 2017, 45(5): 42-45.(in Chinese)[8]ZHOU Ling, SHI Weidong, LI Wei, et al. Numerical and experimental study of axial force and hydraulic performance in a deep-well centrifugal pump with different impeller rear shroud radius[J]. Journal of fluids engineering, 2013, 135(10):10450.[9]王伟平. 离心泵机械密封失效的原因与对策探索[J]. 产业与科技论坛, 2015,14(7):64-65. WANG Weiping. Causes & countermeasures of mecha-nical seal failure of centrifugal pump[J]. Industry & science and technology forum, 2015,14(7):64-65.(in Chinese)[10]柴春林. 离心泵机械密封泄漏现象分析[J]. 润滑与密封, 2009,34(1):104-105. CHAI Chunlin. Leakage analysis of mechanical seal of centrifugal pump[J]. Lubrication engineering, 2009,34(1): 104-105.(in Chinese)[11]樊铭. 离心泵机械密封泄漏原因分析及处理[J]. 能源研究与管理, 2011(4):48-49. FAN Ming. Analysis and treatment of centrifugal pump mechanical seal leakage[J]. Energy research and mana-gement, 2011(4):48-49.(in Chinese)[12]陈玉宝, 黄福川. 离心泵填料密封失效原因及改进措施[J]. 油气储运, 2003(5):55-57. CHEN Yubao, HUANG Fuchuan. Failure cause of packing seal of centrifugal pump & improvement measu-res[J]. Oil & gas storage and transportation, 2003(5):55-57.(in Chinese)[13]肖军. 谈离心泵的机械密封及其控制[J]. 液压气动与密封, 2010,30(5):38-42. XIAO Jun. On centrifugal pump mechanical seal and its control[J]. Hydraulics pneumatics and seals, 2010,30(5): 38-42.(in Chinese)[14]HA T W,CHOE B S. Numerical simulation of rotor dynamic coefficients for eccentric annular-type-plain-pump seal using CFD analysis[J]. Journal of mechanical science and technology, 2012, 26(4): 1043-1048.[15]HA T W, LEE Y B,KIM C H. Leakage and rotor dynamic analysis of a high pressure floating ring seal in the turbo pump unit of a liquid rocket engine[J]. Tribology international, 2002, 35(3): 153-161.[16]WANG C, SHI W, ZHANG L. Calculation formula optimization and effect of ring clearance on axial force of multistage pump[J]. Mathematical problems in engineering, 2013,DOI:10.1155.2013/749375. |
[1] |
. [J]. Journal of Drainage and Irrigation Machinery Engin, 2018, 36(7): 553-559. |
|
|
|
|