14^th Asian International Conference on Fluid Machinery (AICFM14) to be held in Zhenjiang, China, from November 10^th to 13^rd in 2017.

Background
The conference will be organized by Jiangsu
University and held in Beijing (2017). It is a
continuation of the preceding thirteen conferences that
have been held in the name of Asian International
Conference on Fluid Machinery. It has developed from
the fourth conference (1993) as an International
Conference though the start was held in two countries
of Japan and China.
The fifth to thirteenth were held in Seoul (1997),
Johar Baru (2000), Fukuoka (2003), Yichang (2005),
Jeju (2007), Kualalumpur (2009), Chennai (2011), and
Yogyakarta (2013), Tokyo (2015). Asian Fluid
Machinery Committee (AFMC) was established
during the 9th AICFM 2011 held in Jeju, Korea.
At the conference, keynote lectures delivered by
worldwide fluid machinery specialists will be made to
introduce the outstanding achievements in various
fluid machinery areas. The conference is organized by
AFMC. Participation of those who are relevant to
every facet of fluid machinery, R&D will be
encouraged.
The 14th AICFM is co-organized by Asian
Fluid Machinery Committee (AFMC) and Jiangsu
University, and held together with the 1st AWGIAHR
Symposium on Machinery and Systems in
Tsinghua University, Beijing.
Objectives
 To promote a platform for sharing of knowledge
among researchers in the field of fluid machinery
To encourage partnership between academic and
industry
To discuss the role of fluid machinery in light of
sustainable development, depletion of conventional
energy sources and environment challenges
 To establish and strengthen the Asian and regional
networking
Scopes
The scope of this conference includes the all areas of
various fluid machines as follows:
Compressors
Renewable Energy
 Fans and Blowers
Turbomachinery Systems
Gas and Steam Turbines
Turbomachinery Elements including Seals and
Bearings
Pumps
Design, Optimization & Manufacturing of
Turbomachinery
Hydro Turbines
 Control, Operation, Monitoring & Diagnosis
 Heat Transfer
Wind Turbines
Theoretical, Experimental & Computational Fluid
Dynamics
Propellers
Measurement Technology
Flow Meters and Valves
Cavitation & Two Phase Flows
Vessels
Vibration and Noise
Jet Technology
Rotor Dynamics
Propulsion ·
 Tribology
Important dates
 ?? Abstracts Deadline: Jun. 30th , 2017
?? Abstract Acceptance Notification: Jul. 15th , 2017
?? Submission Draft Papers: Aug. 15th , 2017
?? Paper Acceptance Notification: Sep. 30th , 2017
?? Submission of Final Papers: Oct. 15th , 2017
?? Conference: Nov. 10th-13rd, 2017

Registration Fee
Registration
Type:
Early Bird Regular
Before 30th Aug.
2017
1st Sep. to 21st Oct.
2017
Participant 2500RMB 3000RMB
Student Participant 1500RMB 2000RMB
LDC 1500RMB 2000RMB
Accompanying
person 1500RMB 1800RMB
* LDC=lesser developed countries (World Bank def.)
*All rates are in CHINA RMB, plus 6% government services
tax.
Beijing
A city of histories, places of interests, delicious
food.
Beijing has served as the capital of China for
more than 800 years. The city is full of places of
historic interest and scenic beauty, e.g. the Forbidden
City, the Temple of Heaven, the Summer Palace, and
the Great Wall.
Organized Sessions
 Pumps & pump station;
 Hydro Turbines;
 Fans and Blowers;
 Compressors;
 Design, Optimization & Manufacturing of
Turbomachinery
Heat Transfer; Combustion;
 Theoretical, Experimental & Computational
Fluid Dynamics
Cavitation & Two Phase Flows
Rotor Dynamics; Vibration and Noise
 Ocean engineering; Jet Technology; Propulsion
Others
Technical Forum
A technical discussion forum is calling up,
mainly about pump, pump station and hydraulic
turbine, and welcome your concern.
Asian Fluid Machinery Committee (AFMC)
Chairman
 Kwang-Yong Kim, Inha University, Korea
Secretary General
Mazlan Abdul Wahid, Universiti Technologi Malaysia
Advisors
Tsujimoto Yoshinobu. Osaka University, Japan
Furukawa Akinori, Oita National College of
Technology, Japan
Yulin Wu, Thermal Engineering Dept, Tsinghua
University, China
Committee
Feng Ding, Yangtze University, China
 Shengxiong Xue, Hefei General Machinery
Research Institute, China
Shouqi Yuan, Jiangsu University, China
Zhang, Yangjun, Department of Automotive
Engineering, Tsinghua University, China
Prasad, B,V,S.S.S., Department of Mechanical Eng.
IIT Madras, India
Prabhu, Siddini V, Department of Mechanical Eng.
IIT Bombay, India
Priyono Sutikno, Institut Teknologi Bandung,
Indonesia
Berkah Fajar Tamtomo Kiono, University of
Diponegoro, Indonesia
Ahmad Nourbakhsh, University of Tehran, Iran
 Mehrdad Raisee Dehkordi, University of Tehran,
Iran
Chisachi Kato, University of Tokyo, Japan
 Jun Matsui, Yokohama National University, Japan
Kazuhiro Tanaka, Kyushu Institute of Technology,
Japan
Satoshi Watanabe, Kyushu University, Japan
Kwang-Yong Kim, School of Mechanical Engineering,
Inha University, Korea
Youn-Jea Kim, School of Mechanical Engineering,
Sungkyunkwan University, Korea
Soo-Seok Yang, Aero Propulsion System Dept.
Korea Aerospace Research Institute, Korea
Young-Seok Choi, Chungcheong Regional Division,
Korea Institute of Industrial Technology (KITECH),
Korea
Alias Mohd Noor, Universiti Teknologi Malaysia,
Malaysia
 Mazlan abdul Wahid, Universiti Teknologi Malaysia,
Malaysia
Winoto, S. H. Dept. of Mechanical Engineering,
National University of Singapore, Singapore
Wai Lame Loh, Dept. of Mechanical Engineering,
National University of Singapore , Singapore

Shyy-Woei Chang, Dept. of Marine Engineering,
National Kaohsiung Marine University, Taiwan
Huang, Chih-Yung, Department of Power
Mechanical Engineering, National Tsing Hua
University, Hsinchu, Taiwan
Udomkiat Nontakaew, King Mongkut’s Institute of
technology North Bangkok, Thailand
Local Organizing Committee
Chairman:
 Shouqi Yuan, Jiangsu University
Executive Chairman:
Jianping Yuan, Jiangsu University
Co-Chairmen:
Yangjun Zhang, Thermal Engineering Dept,
Tsinghua University, China
 Feng Ding, Yangtze University, China
 Shengxiong Xue, Hefei General Machinery
Research Institute, China
Hong Li, Jiangsu University
 Zhengwei Wang, Tsinghua University
Shuhong Liu, Tsinghua University
 Xingqi Luo, Xi’an University of Technology
 Fujun Wang, China Agriculture University
 Dazhuan Wu, Zhejiang University
 Guoyu Wang, Beijing Institute of Technology
Members

 Shuliang Cao, Tsinghua University
 Jianjun Feng, Xi’an University of Tech.
Rennian Li, Lanzhou University of Tech.
Fengchen Li, Harbin Institute Tech.
 Chao Liu, Yangzhou University
Li Lu, China Inst. of Water Resources and
Hydropower Research Center
Xuelin Tang, China Agriculture University
 Zhongdong Qian, Wuhan University
Xianwu Luo, Tsinghua University
 Daqing Qin, Harbin Electric Machinery Co., Ltd
 Dezhong Wang, Shanghai Jiaotong University
Yongzhi Zhao, Dongfang Electric Machinery Co.,
Ltd
Zuchao Zhu, Zhejiang Sci-Tech University
A’man Zhang, Harbin Engineering University
 Can Kang, Jiangsu University
 Yuning Zhang, North China Electric Power
University
Secretaries General
Jinfeng Zhang, Jiangsu University
zhangjinfeng@ujs. edu.cn
Secretariat Members:
Qiaorui Si, Yin Luo, Fan Zhang, Ping Huang
Contact:
Research center of fluid machinery Engineering and
technology, Jiangsu University, Zhenjiang 212013,
China
E-mail: 2017aicfm14@ujs.edu.cn
 Phone: +86-511-88780280, +86-511-88783358
Fax: +86-511-88780280
 Website:
http://aicfm14.csp.escience.cn
Paper Submission
Prospective Authors are invited to submit abstract of
original unpublished works. Abstract should be in MS
Word or PDF format and abstracts written in English
not exceeding 500 words should contain the title of the
paper, author’s names and affiliations. Relevant
information must be submitted together with the
abstract author name, affiliation, address, contact
phone/fax, postal code and email.
Instruction for Authors
Paper must reach the conference Secretariat on/or
before the specified deadline. Please refer to the
conference website for guidelines on paper format.
Publications
Papers of Journal Quality as recommended by the
reviewers will be considered for publication in the special
issue of “Journal of Drainage and Irrigation Machinery
Engineering”, “Chinese Journal of Mechanical
Engineering”, “Journal of Mechanical Science and
Technology” and “International Journal of Fluid
Machinery and Systems” scheduled after the
Conference.
Language
English must be used in your abstract and final paper
as well as your presentation.

由亚洲流体机械委员会主办，中国工程热物理学会、江苏大学承办的“第十四届亚洲流体机械学术会议（AICFM14）”将于2017年11月10日至13日在 镇江 召开。此次会议将与2017年中国工程热物理协会热机气动热力学和流体机械学术会议、国家自然科学基金项目进展交流会同时举办。