Influence of geometric parameters of front wear-ring of a vertical self-priming pump on its self-priming performance
ZHAO Weiguo1,2*, QIANG Huanhuan1, XU Qiang1, LIU Mingjian1
1. College of Energy and Power Engineering, Lanzhou University of Technology, Lanzhou, Gansu 730050, China; 2. Key Laboratory of Fluid Machinery and System of Gansu Province, Lanzhou University of Technology, Lanzhou, Gansu 730050, China
Abstract:In order to explore the influence of the geometric parameters of the front wear-ring of a vertical self-priming pump on its self-priming performance, this study takes the 350WFB-1200-50 externally mixed sealless vertical self-priming pump as the research object. With other parameters unchanged, a total of 20 solutions were designed by changing the numerical values of the anterior orifice ring gap δ and the anterior orifical ring length l. Using a research method that combines numerical calculation and experimental verification, the external characteristic curve of each design scheme and the pressure difference between the inlet and outlet of the front wear-ring are obtained through steady numerical calculation, and the gas volume distribution cloud map of the middle section at different times of each design scheme was obtained through unsteady numerical calculations. The change diagram of the gas content rate at the outlet of the self-priming pump of each design scheme and the self-priming completion time curve of each design scheme were used to study the influence of the geometric parameters of the front wear-ring on its self-priming performance. The study found that the front wear-ring clearance δ and the front wear-ring length l have an effect on the self-priming performance of the self-priming pump, appropriately reducing the front wear-ring clearance δ and increasing the front wear-ring length l can improve the self-priming performance of the self-priming pump, and when the front wear-ring clearance δ is too large, the effect of the front wear-ring clearance δ on the self-priming performance of the self-priming pump is larger than the effect of the front wear-ring length l on the self-priming performance of the self-priming pump.
赵伟国,*,强欢欢,许强,刘明建. 立式自吸泵前口环几何参数对其自吸性能的影响[J]. 排灌机械工程学报, 2024, 42(): 333-341.
ZHAO Weiguo,*,QIANG Huanhuan,XU Qiang,LIU Mingjian. Influence of geometric parameters of front wear-ring of a vertical self-priming pump on its self-priming performance. Journal of Drainage and Irrigation Machinery Engin, 2024, 42(): 333-341.