Abstract:The external performance of designed axial-flow pump was tested with and without guide vane.Using the five-hole probe to measure the flow field at the inlet and outlet of guide vane through the mea-suring holes,the velocity components curves were given.The experimental results show that the power curves of pump with guide vane and without guide vane are the same.The guide vane has no influence on the performance of the impeller.At the efficiency point,the circular velocity at the outlet of guide vane is small and the recovering rotating kinetic energy of the guide vane is about 15.7% of total energy.The operating point of pump without guide vane will move to the lower flow,so the design of axial-flow pump without guide vane needs parameter compensation.Using the five-hole probe to measure the three-dimensional velocity distribution of flow field has the merits of simple operation and well applicability.The experimental data reveals the guide vane influence on performance of axial-flow pump and provides reference for the further study of flow field in axial-flow pump.
李忠, 杨敏官, 王晓坤. 导叶对轴流泵性能影响的试验[J]. 排灌机械工程学报, 2009, 27(1): 15-18.
Li Zhong,Yang Minguan,Wang Xiaokun. Experimental study of guide vane influence on performance of axial-flow pump. Journal of Drainage and Irrigation Machinery Engin, 2009, 27(1): 15-18.
[1]杨敏官,孙国梓.轴流式强制循环泵选型设计参数补偿办法[J].农业机械学报,1999,30(5):48-51.Yang Minguan,Sun Guozi.Parametric-compensation method for model selection design of coerced circulating axial-flow pump[J].Transactions of the Chinese Society for Agricultural Machinery,1999,30(5):48-51.(in Chinese)[2]Sumio S,Masahiro S,Hideo F,et al.Computational cavitation flows at inception and light stages on an axial-flow pump blade and in a cage-guided control valve[J].Journal of Thermal Science,2007,16(4):337-345.[3]Gao Hong,Lin Wanlan,Du Zhaohui.Numerical flow and performance analysis of a water-jet axial flow pump[J].Ocean Engineering,2008,35(16):1604-1614.[4]杨军虎,张炜,王春龙,等.潜水轴流泵全流道三维湍流数值模拟及性能预估[J].排灌机械,2006,24(4):5-9.Yang Junhu,Zhang Wei,Wang Chunlong,et al.Numerical simulation of turbulent flow through full passage of submersible axial pump and performance predictions[J].Drainage and Irrigation Machinery,2006,24(4):5-9.(in Chinese)[5]陆林广,伍杰,陈阿萍,等.立式轴流泵装置的三维湍流流动数值模拟[J].排灌机械,2007,25(1):29-32.Lu Linguang,Wu jie,Chen Aping,et al.Numerical simulation of 3D turbulent flow in a vertical axial-flow pump system[J].Drainage and Irrigation Machinery,2007,25(1):29-32.(in Chinese)[6]柴胜凯,罗兴锜,廖伟丽.轴流泵叶轮内部三维流动分析[J].排灌机械,2004,22(1):16-19.Chai Shengkai,Luo Xingqi,Liao Weili.Three-dimensional flow investigation of axial pump impeller[J].Drainage and Irrigation Machinery,2004,22(1):16-19.(in Chinese)[7]黄欢明,高红,沈枫,等.轴流泵内流场的数值模拟与实验[J].农业机械学报,2008,39(8):66-69.Huang Huanming,Gao Hong,Shen Feng,et al.Numerical simulation and experimental validation of the flow field in axial flow pump[J].Transactions of the Chinese Society for Agricultural Machinery,2008,39(8):66-69.(in Chinese)[8]杨敏官.泵和水轮机的内流测试分析[M].北京:兵器工业出版社,1995:98-104.