Abstract：In order to clarify mechanism of blades acting on a liquid, the hydraulic performance, energy distribution properties at impeller outlet and internal flow in mixed-flow impellers with different blade thickness profiles were investigated by using numerical methods. The kinetic and static pressure energies as well as the total energy at impeller outlet were obtained. In addition, the total energy was decomposed into radial and axial components, and their proportions to total energy were calculated. The fluid patterns around blades with different thickness profiles were analyzed.The results show that the streamline-wise variable blade thickness profile can result a better hydraulic performance than the span-wise variable thickness profile, especially in the case where the maximum thickness occurs near the hub. The total energy is almost the static pressure energy at impeller outlet, but it has a similar distribution feature to kinetic energy. The radial and axial energy proportion shave a relationship with both blade thickness profile and pump working condition. For the streamline-wise variable blade thickness profile, the blade can adapt the flow in both the axial and radial directions. For the span-wise variable blade thickness profile, however, the blade can adapt flow in one direction only.
杨敏官, 李玉婷*, 高波, 倪丹, 张永超. 不同叶型对混流式核主泵叶轮出口能量分布的影响[J]. 排灌机械工程学报, 2018, 36(7): 560-566.
YANG Minguan, LI Yuting*, GAO Bo, NI Dan, ZHANG Yongchao. Influence of blade thickness profile on energy distribution at impeller outlet of mixed-flow nuclear reactor coolant pump. Journal of Drainage and Irrigation Machinery Engin, 2018, 36(7): 560-566.
[1]KIM Jin Hyuk, AHN Hyung Jin, KIM Kwang Yong.High-efficiency design of a mixed-flow pump[J].Technological sciences, 2010,53(1):24-27.[2]LONG Y,YIN J L,WANG D Z,et al.Study on the effect of the impeller and diffuser blade number on reactor coolant pump performances[C]//Proceedings of the IOP Conference Series: Materials Science and Engineering. [S.l.]:IOP Publishing, 2016,129(1):12-41.[3]MANIVANNAN A. Computational fluid dynamics analysis of a mixed-flow pump impeller [J]. International journal of science and technology, 2010,2(6):200-206.[4]LI W G. Blade exit angle effects on performance of a standard industrial centrifugal oil pump[J].Journal of applied fluid mechanics, 2011,4(2):105-119.[5]LI Jidong, ZENG Yongzhong. Optimum design on impeller blade of mixed-flow pump based on CFD[J]. Procedia engineering, 2012,31:187-195.[6]RAGOTH S R. Optimizing impeller geometry for performance enhancement of a centrifugal blower using the Taguchi quality concept [J]. International journal of engineering science and technology, 2012,4(10):4308-4314.[7]MICHAL V, PETER H. Geometry design of a mixed-flow pumpusing experimental results on internal impeller flow [J]. Procedia engineering, 2012,39:168-174.[8]BING Hao, CAO Shuliang. Three-dimensional design method for mixed-flow pump blades with controllable blade wrap angle [J].Journal of power and energy, 2013:567-583.[9]李宝良,范振兴,霍焰.基于CFD混流泵内流场数值分析[J]. 大连交通大学学报,2011,32(1):43-46. LI Baoliang,FAN Zhenxing,HUO Yan. Numerical simulation of interior flow field of mixed-flow pump based on CFD[J].Journal of Dalian Jiaotong University, 2011,32(1):43-46.(in Chinese)[10]马桂超,汤方平,杨帆,等.基于CFX的混流泵内流场数值模拟[J].水电能源科学,2012,30(3):128-131. MA Guichao,TANG Fangping,YANG Fan,et al. Numerical analysis of interior flow field of mixed-flow pump based on CFX[J]. Water resource and power, 2012,30(3):128-131.(in Chinese)[11]聂沛军, 王永生, 常书平.混流泵叶轮轴面流道设计及轴面速度场的求解[J].船海工程,2011,40(5):46-49. NIE Peijun,WANG Yongsheng, CHANG Shuping. Design of mixed-flow pump impeller flow channel and solution of the axial surface velocity field[J]. Ship and ocean engineering, 2011,40(5):46-49.(in Chinese)[12]刘国辉.叶片厚度对混流泵性能的影响研究[J].船电技术,2013,33(2):26-29. LIU Guohui.Research on effects of blade thickness on mixed-flow pump performances[J]. Marine electric and electronic technology, 2013,33(2):26-29.(in Chinese)[13]杨敏官,陆胜,高波, 等.叶片厚度对混流式核主泵叶轮能量性能影响研究[J].流体机械,2015,43(5):28-32. YANG Minguan,LU Sheng,GAO Bo,et al. Influence of blade thickness on energy performance of mixed-flow nuclear main pump[J].Fluid machinery, 2015,43(5):28-32.(in Chinese)[14]斯捷潘诺夫.离心泵和轴流泵理论、设计和应用[M].北京:机械工业出版社,1969.[15]罗惕乾.流体力学[M].北京:机械工业出版社,2001.[16]沙毅,侯丽艳. 叶片厚度对轴流泵性能影响及内部流场分析[J]. 农业工程学报,2012,28(18):75-81. SHA Yi, HOU Liyan. Influence of blade thickness to the performance and internal flow[J]. Transactions of the CSAE, 2012,28(18):75-81.(in Chinese)
