Abstract：The propellant pump of specific liquid propellant rocket engine suffers from serious pressure fluctuation,the bad matching of inducer and impeller is an important cause of larger pressure fluctuation and lower performance of pump.the In order to study the effect of matching of inducer and impeller on pump hydraulic performance and pressure fluctuation, numerical simulation by using commercial CFD code were carried out to analyze the detailed impact of various inducer configurations on pump flow filed and performance. The results show that, for the high-speed centrifugal pump with large flow rate, using the inducer with equal-pitch outlet is advantageous to improve the flow effect of impeller inlet, and can improve its performance evidently. The larger inducer blade turning angle can result in the reflux in impeller inlet,and lower performance of pump.Compared to the inducer type, the relative position between inducer and impeller has smaller impact on pump performance. The decrease of axial distance between inducer and impeller results in the flow field distribution in impeller getting worse, and the performance of pump lower.Considering cavitation performance,pressure fluctuation levels and efficiency of pump,the final scheme is choosing the inducer with variable-pitch inlet and equal-pitch outlet.
王文廷, 陈晖, 李永鹏, 杜玉洁. 高速离心泵诱导轮与离心轮的匹配[J]. 排灌机械工程学报, 2015, 33(4): 301-305.
Wang Wenting, Chen Hui, Li Yongpeng, Du Yujie. Matching research of inducer and impeller of high-speed centrifugal pump. Journal of Drainage and Irrigation Machinery Engin, 2015, 33(4): 301-305.
[1]陈晖,张恩昭,谭永华,等. 高速平板诱导轮的结构设计与分析[J]. 火箭推进,2009,35(3):1-5. Chen Hui,Zhang Enzhao,Tan Yonghua,et al.Geometry desing and analysis of the high-speed rotational plaet inducer[J].Journal of Rocket Propulsion,2009,35(3):1-5.(in Chinese)[2]潘中永,袁建平,杨敬江,等. 诱导轮与泵主叶轮的匹配关系研究[J].水泵技术,2000(3):7-9. Pan Zhongyong,Yuan Jianping,Yang Jingjiang,et al.Study on matching of inducer and impeller[J].Pump Technology,2000(3):7-9.(in Chinese)[3]徐成波.高速离心泵中诱导轮与离心轮的匹配关系研究[J].水泵技术,1997(3):6-8. Xu Chengbo.Study on matching of inducer and impeller in high-speed centrifugal pump[J].Pump Technology,1997(3):6-8.(in Chinese)[4]朱祖超. 提高高速泵汽蚀性能的理论分析与实验研究[J].机械工程学报,1999,35(6):85-88. Zhu Zuchao.Theoretical analysis and engineering implementation on achieving excellent suction performance of high speed centrifugal pumps[J].Chinese Journal of Mechanical Engineering,1999,35(6):85-88.(in Chinese)[5]谭磊,曹树良.中比转速离心泵叶轮的优化设计和数值模拟[J].排灌机械工程学报,2010,28(4):282-285. Tan Lei,Cao Shuliang.Optimal design and numerical simulation for impeller of centrifugal pump with medium-high specific speed[J].Journal of Drainage and Irrigation Machinery Engineering,2010,28(4):282-285.(in Chinese)[6]孔繁余,黄建军,吕毅,等.离心泵变螺距诱导轮的开发[J].排灌机械,2008,26(3):10-14. Kong Fanyu,Huang Jianjun,Lü Yi,et al.Development of variable-pitch inducers in centrifugal pump[J].Drainage and Irrigation Machinery,2008,26(3):10-14.(in Chinese)[7]唐飞,李家文,陈晖,等.采用环形入口壳体的诱导轮汽蚀性能研究[J].机械工程学报,2011,47(4):171-176. Tang Fei,Li Jiawen,Chen Hui,et al.Study on cavitation performance of inducer with annulus inlet casing[J].Chinese Journal of Mechanical Engineering,2011,47(4):171-176.(in Chinese)[8]Kyoung H L,Lee J M,Park J S,et al.A Study on cavitation interaction between inducer and impeller in turbopump[C]//40th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit,2004.[9]Kosuke Ashihara,Akira Goto,Kenjiro Kamijo,et al.Improvements of inducer inlet backflow characteristics using 3-D inverse design method[C]//38th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit,2002.[10]崔宝玲,朱祖超,林勇刚.等螺距诱导轮内部流动的数值模拟[J].机械工程学报,2010,46(6):158-162. Cui Baoling,Zhu Zuchao,Lin Yonggang.Numerical si-mulation of inner flow in equal-pitch inducer[J].Chinese Journal of Mechanical Engineering,2010,46(6):158-162.(in Chinese)[11]唐飞,李家文,夏德新,等.提高氧泵诱导轮汽蚀性能的方法研究[J].航空动力学报,2008,23(9):1743-1746. Tang Fei,Li Jiawen,Xia Dexin,et al.Study of methodo-logy for improving cavitation performance of liquid oxygen pump inducer[J].Journal of Aerospace Power,2008,23(9):1743-1746.(in Chinese)[12]关醒凡.现代泵理论与设计[M].北京:中国宇航出版社,2011.
