Development of 150QJS20 stainless steel casting multistage deep-well pump
Zhang Qihua1, Xu Yuanhui1, Xu Yan1, Ma Dongqi2, Zheng Wei2, Lian Songjin 2, Lu Weigang1
1.National Research Center of Pumps, Jiangsu University, Zhenjiang, Jiangsu 212013, China; 2.Fujian Academy of Mechanical Sciences, Fuzhou, Fujian 350005, China
Abstract:Stainless steel casting multistage deep-well pumps have been extensively used in some specific applications where excellent corrosion- and wear-resistance as well as long life-span are highly desirable. Because of stainless steel investment casting multistage deep-well pumps with high cost, they are targeted to mid- or high-end users. By utilizing existing stainless steel casting techniques, a type 150QJS20 multistage deep-well pump was developed. Four kinds of techniques used in the development process are as follows:(1)the guide vane was cast by using outward rather than inward flanging technique to overcome the difficulty in cleaning sand from castings;(2)the inflow diffuser was adopted in this design to reduce manufacturing cost and shorten the axial length of di-ffuser, and eventually to improve the pump operation reliability;(3)tie-bolts are used to assemble the pump, and connection between stages is realized by spigots filled with O-shape seals, causing a more compact pump construction, convenient transportation and easy maintenance;(4)major accessories are interchangeable in the same series to reduce manufacturing cost. A prototype pump was built and its performance was measured, showing its efficiency being comparable with the international standard level and a greatly improved stage head. Compared with the traditional multistage deep-well pumps, the new type pump has a more compact configuration and lighter weight. Therefore the success in development of 150QJS20 pump can provide useful experience for development of other similar stainless steel casting pumps for mid- and high-end users.
[1]施卫东,王洪亮,余学军,等.深井泵的研究现状与发展趋势[J].排灌机械,2009,27(1):64-68. Shi Weidong, Wang Hongliang, Yu Xuejun, et al. Development and prospect of deep well pump in China[J]. Drainage and Irrigation Machinery, 2009,27(1):64-68.(in Chinese)[2]陆伟刚,庞杰文,施卫东,等.拉杆结构深井泵的设计[J].农业机械学报,2006,37(7):201-203. Lu Weigang, Pang Jiewen, Shi Weidong, et al. Develo-pment of a rod-connected deep well pump[J]. Transa-ctions of the Chinese Society for Agricultural Machinery, 2006,37(7):201-203.(in Chinese)[3]陆伟刚,施卫东,王准.井泵新系列研究与探讨[J].中国农村水利水电,2006(3):49-51. Lu Weigang, Shi Weidong, Wang Zhun. Study on a new series of well pump[J]. China Rural Water and Hydropower, 2006(3):49-51.(in Chinese)[4]施卫东,张启华,陆伟刚,等.新型深井离心泵叶轮内部流动的研究[J].流体机械,2008,36(5):21-24. Shi Weidong, Zhang Qihua, Lu Weigang, et al. Research on the internal flow of impeller on new-type deep well pump[J]. Fluid Machinery, 2008,36(5):21-24.(in Chinese)[5]施卫东,张启华,陆伟刚.新型井泵水力设计及内部流动的数值模拟[J].江苏大学学报:自然科学版,2006,27(6):528-531. Shi Weidong, Zhang Qihua, Lu Weigang. Hydraulic design of new-type deep well pump and its flow calculation[J]. Journal of Jiangsu University:Natural Science Edition, 2006, 27(6): 528-531.(in Chinese)[6]王川,陆伟刚,施卫东,等.不锈钢冲压潜水井泵的数值计算与试验验证[J].江苏大学学报:自然科学版,2012, 33(2): 176-180. Wang Chuan, Lu Weigang, Shi Weidong, et al. Numerical calculation and experimental verification of stainless steel stamping submersible well pump[J]. Journal of Jiangsu University:Natural Science Edition, 2012, 33(2): 176-180.(in Chinese)[7]王川,施卫东,陆伟刚,等.不同叶片厚度的不锈钢冲压井泵性能模拟与试验[J].农业机械学报,2012,43(7):94-99. Wang Chuan, Shi Weidong, Lu Weigang, et al. Effect and experiment of different blade thickness on stainless steel stamping well pump performance[J]. Transactions of the Chinese Society for Agricultural Machinery, 2012,43(7):94-99.(in Chinese)[8]施卫东,王川,司乔瑞,等.级间间隙对新型井泵性能的影响[J].排灌机械工程学报,2012,30(6):627-631. Shi Weidong, Wang Chuan, Si Qiaorui, et al. Influence of inter-stage seal clearance on performance of new-type well pump[J]. Journal of Drainage and Irrigation Machinery Engineering, 2012,30(6):627-631.(in Chinese)[9]王洪亮,施卫东,陆伟刚,等.基于正交试验的深井泵优化设计[J].农业机械学报,2010,41(5):56-63. Wang Hongliang, Shi Weidong, Lu Weigang, et al. Optimization design of deep well pump based on latin square test[J]. Transactions of the Chinese Society for Agricultural Machinery, 2010,41(5):56-63.(in Chinese)[10]施卫东,周岭,陆伟刚,等.高扬程深井离心泵的正交试验与优化设计[J].江苏大学学报:自然科学版,2011, 32(4): 400-404. Shi Weidong, Zhou Ling, Lu Weigang, et al. Orthogonal test and optimization design of high-head deep-well centrifugal pump[J]. Journal of Jiangsu University:Na-tural Science Edition, 2011, 32(4): 400-404.(in Chinese)[11]周岭,施卫东,陆伟刚,等.叶轮进口边位置对深井离心泵水力性能的影响[J].农业机械学报,2012,43(3):78-82. Zhou Ling, Shi Weidong, Lu Weigang, et al. Hydraulic performance effect of impeller inlet edge position on deep-well centrifugal pump[J]. Transactions of the Chinese Society for Agricultural Machinery, 2012, 43(3): 78-82.(in Chinese)[12]施卫东,王川,陆伟刚,等.深井离心泵的回归分析与数值模拟[J].华中科技大学学报:自然科学版,2012,40(6):11-15. Shi Weidong, Wang Chuan, Lu Weigang, et al. Regression analysis and numerical simulation of deep-well centrifugal pumps[J]. Journal of Huazhong University of Science and Technology:Natural Science Edition, 2012, 40(6): 11-15.(in Chinese)[13]Zhang Qihua, Xu Yan, Shi Weidong,et al.Research and development on the hydraulic design system of the guide vanes of multistage centrifugal pumps[J]. Applied Mechanics and Materials,2012,197:24-30.[14]张启华,徐燕,施卫东,等. 多级离心泵圆周弯扭式导叶设计及性能试验[J].农业工程学报,2013,29(5):37-43. Zhang Qihua, Xu Yan, Shi Weidong, et al. Design and performance test of circumferential crankle guide vane of multistage centrifugal pumps[J]. Transactions of the CSAE, 2013,29(5):37-43.(in Chinese)[15]Zhang Qihua,Shi Weidong,Xu Yan, et al.A new proposed return guide vane for compact multistage centrifugal pumps[J].International Journal of Rotating Machi-nery,2013:683713.