Abstract：As one of the general machines,pumps are widely used in many fields.A brief pump history is reviewed.As an application subject,pump technique recently has made much progress in basic theory and application field.This paper summarizes the research achievements about pumps numerical simulation and test,modern pump design theories and methods,new pump products and techniques,and so on.Also,the present development situation of pumps and its reasons are analyzed.At last,the future development trends of pumps are brought forward from some aspects such as design methods for energy saving,optimization operation,cavitation,all life cost,flow induced vibration and noise and so on.pumps;fluid machinery;research development;basic theory research;application research
袁寿其；刘厚林. 泵类流体机械研究进展与展望[J]. 排灌机械工程学报, 2007, 25(6): 46-51.
YUAN Shou-qi, LIU Hou-lin. Research progress and prospect on fluid machinery-pumps. Journal of Drainage and Irrigation Machinery Engin, 2007, 25(6): 46-51.
[1] 范宗霖,张翼飞,陈金海.我国泵行业的现状与未来思考[J].水泵技术,2007(1):32-33,47-48[2] Kelecy F J.Numerical perdiction of cavitation in a centrifugal pump[J].ONET-CFD Network Newsletter,2003,2(3):14-16[3] Paone N.Experiment investigation of the flow in the vaneless diffuser of a centrifugal pump by particle image displacement velocimetry[J].Experiments in Fluids,1989,7:371-378[4] Sinha M,Katz J.Quantitative visualization of the flow in a centrifugal pump with diffuser vanes-Ⅰ:on flow structures and turbulence[J].Journal of Fluids Engineering,2000,122(3):97-107[5] Wuibaut G,Bois G,Dupont P.PIV measurements in the impeller and the vaneless diffuser of a radial flow pump in design and off-design operating conditions[J].Journal of Fluids Engineering,2002,124(9):791-797[6] 袁建平,袁寿其,何志霞.离心泵内部流动测试研究进展[J].农业机械学报,2004,35(4):188-191[7] 袁寿其.离心泵水力设计进展及其内部流动三维湍流场数值模拟[M].镇江:江苏大学,2003[8] 关醒凡.系列轴流泵模型实验研究成果报告[J].水泵技术,2005(4):12-15,34[9] 曹树良,梁莉,祝宝山.高比转速混流泵叶轮设计方法[J].江苏大学学报(自然科学版),2005,26(3):185-188[10] 关醒凡.我国泵技术的发展与展望[J].通用机械,2005(9):38-41[11] 谈明高,刘厚林,袁寿其.离心泵性能预测软件的开发[J].水泵技术,2007(1):26-28[12] 王福军,黎耀军,王文娥.水泵CFD中应用中的若干问题与思考[J].排灌机械,2005,23(5):1-10[13] 刘厚林,关醒凡,施卫东.我国泵CAD技术的特点及发展[J].流体机械,2002,30(3):26-29[14] Muggli F A,Holbein P,Dupont P.CFD calculation of a mixed flow pump characteristic from shutoff to maximum flow[J].Journal of Fluids Engineering,2002,124(3):798-802[15] 王海松.轴流泵CAD-CFD 综合特性研究[D].北京:中国农业大学,2005[16] 胡志强.泵技术发展趋势[J].通用机械,2003(8):15-17[17] 王安生.泵类产品结构调整的回顾与展望[J].通用机械,2003(2):4-5[18] Byskov R K,Jacobsen C B,Pedersen N.Flow in a centrifugal pump impeller at design and off-design conditions(part Ⅱ):large eddy simulations[J].Journal of Fluids Engineering,2003,125(1):73-83[19] Shi F,Tsukamoto H.Numerical study of pressure fluctuations caused by impeller-diffuser interaction in a diffuser pump stage[J].Journal of Fluids Engineering,2001,123(9):466-474[20] Gonzalez J,Fernandez J,Blanco E.Numerical simulation of the dynamic effects due to impeller-volute interaction in a centrifugal pump[J].Journal of Fluids Engineering,2002,124(6):348-355[21] Goto A,Nohmi M,Sakurai T.Hydrodynamic design system for pumps based on 3-D CAD,CFD,and inverse design method[J].Journal of Fluids Engineering,2002,124(2):329-335[22] Goto A,Zangeneh M.Hydrodynamic design of pump diffuser using inverse design method and CFD[J].Journal of Fluids Engineering,2002,124(2):316-328[23] Medvitz R B,Kunz R F,Boger D A.Performance analysis of cavitating flow in centrifugal pumps using multiphase CFD[J].Journal of Fluids Engineering,2002,124(2):377-383[24] Nohmi M,Iga Y,Goto A.Cavitation CFD in a centrifugal pump[A].Osaka,Japan,2003:CAV03-0S-4-010
