Numerical simulation of 3D turbulent flow in a vertical axial-flow pump system
LU Lin-guang1, WU Jie2, CHEN A-ping1, QIN Zhong-jian2
1.College of Hydraulic Science and Engineering, Yangzhou University, Yangzhou, Jiangsu 225009, China; 2.Investigation and Design Institute of Huaihe River Commission, Bengbu, Anhui 233001, China
Abstract:Numerical simulation for 3D turbulent flow in an axial-flow pump and the pump system is conducted.The mathematical models of both axial-flow pump and vertical axial-flow pump system are built up,and numerical simulations of 3D turbulent flows in the pump and pump system are completed respectively.The computed result is consistent with that of the model test.
[1] 金忠青.N-S方程的数值解及紊流模型[M].南京:河海大学出版社,1988:11-66[2] 王福军.计算流体动力学分析-CFD软件原理与应用[M].北京:清华大学出版社,2004:113-143[3] 马福喜,王金瑞.三维水流数值模拟[J].水利学报,1996(8):39-44[4] 曹树良,许国,吴玉林.水轮机蜗壳和固定导叶内部三维紊流的数值研究[J].工程热物理学报,1998,19(5):586-589[5] 郭鹏程,罗兴锜,刘胜柱.基于三维紊流数值计算的离心泵叶轮优化设计[J].机械工程学报,2004,40(4):181-184[6] Rodi W.Turbulence models and their application in hydraulics experimental and mathematical fluid dynamics[M].Delft:IAHR Section on Fundamentals of Division Ⅱ,1980:44-46[7] 陆林广,祝婕,冷豫.泵站进水流道模型水力损失的测试[J].排灌机械,2005,23(4):14-17[8] 陆林广,吴开平,冷豫.泵站出水流道模型水力损失的测试[J].排灌机械,2005,23(5):23-26