Abstract：In order to explore a type of pressure relief valve type with an even more suitability to a large irrigation pipe network, a new type design of pressure relief valve was proposed, and its structure and working principle were explained. Using Gambit and CFX software, three-dimensional models of the valve were established at five openings(i.e. 0.8, 1, 1.2, 1.6 and 2.4 cm)of the valve clack and numerical simulations were conducted to analyze static characteristics of the valve body. The variation rules of inlet and outlet pressure difference and the driving force on the valve clack were demonstrated under various inlet flow conditions, Meanwhile, the pressure and velocity contours in the valve body and a few specially chosen cross-sections were also analyzed. The pressure differences between inlet and outlet under different inlet flow conditions were measured on an experimental model when the clack openings were at 1, 1.6 and 2.4 cm, respectively. The results show that the deviation between measurement and simulation is between 2.8% and 7.9%, suggesting the proposed design is reasonable. This outcome provides a theoretical guidance for hydraulic design of the valve body, and offers reference for similar product development in the future.
于贤磊, 陈松山, 杨夏威, 周明耀*. 大型灌溉管网减压阀特性数模分析与试验研究[J]. 排灌机械工程学报, 2018, 36(9): 824-828.
YU Xianlei, CHEN Songshan, YANG Xiawei, ZHOU Mingyao*. Numerical study and experiment on characteristics of pressure relief valve in large irrigation pipe network. Journal of Drainage and Irrigation Machinery Engin, 2018, 36(9): 824-828.
[1]FESTER V G, KAZADI D M, MBIYA B M, et al. Loss coefficients for flow of Newtonian and non-Newtonian fluids through diaphragm valves[J]. Chemical engineering research & design, 2007, 85(9):1314-1324.[2]PRESCOTT S L, ULANICKI B. Dynamic modeling of pressure reducing valves[J]. Journal of hydraulic engineering, 2003, 129(10):804-812. [3]WANG X, CHANG J, WEN Y, et al. Analysis and emulation of steady-state characteristic for water hydraulic proportional throttle valve[C]//Proceedings of the 10th International Conference on Computer-Aided Industrial Design & Conceptual Design, 2010:1090-1095.[4]乔怡超. 供水管网减压阀优化控制漏失研究[D]. 哈尔滨:哈尔滨工业大学, 2014.[5]RYU J, CHEONG C, KIM S, et al. Computation of internal aerodynamic noise from a quick-opening throttle valve using frequency-domain acoustic analogy[J]. Applied acoustics, 2005, 66(11):1278-1308..[6]张怀亮, 袁坚, 邹伟. 基础振动下直动式减压阀动态特性分析[J]. 工程设计学报, 2013, 20(4):298-302. ZHANG Huailiang,YUAN Jian,ZOU Wei. The dynamic characteristics analysis of direct operated pressure redu-cing valve on fundamental vibration [J]. Chinese journal of engineering design,2013,20(4):298-302.(in Chinese)[7]李光飞, 刘桓龙, 邓斌,等. 液动力对锥阀振动特性的影响[J]. 机床与液压, 2014, 42(5):28-30. LI Guangfei,LIU Huanlong,DENG Bin,et al.Effect of flow force to the poppet valve vibration [J].Machine tool & hydraulics,2014,42(5):28-30.(in Chinese)[8]费扬. 新型高参数减压阀流动特性与高温高压强度分析[D]. 杭州:浙江大学, 2015.[9]李晓杰, 潘玉田, 岳喜凯,等. 导阀参数对先导式减压阀动态特性影响的分析[J]. 太原理工大学学报, 2013, 44(5):594-597. LI Xiaojie,PAN Yutian,YUE Xikai,et al. Simulated analysis on the dynamic behavior influence caused by pilot valve parameters upon pilot operated pressure redu-cing valve [J].Journal of Taiyuan University of Technology,2013,44(5):594-597.(in Chinese)
