Experimental and numerical investigations of unsteady tip leakage vortex cavitating flows around a hydrofoil
ZHAO Yu1, 2, ZHAO Xingan2, WANG Guoyu2, GAO Deming2
1.Beijing Institute of Mechanical & Electrical Engineering, Beijing 100074, China; 2.School of Mechanical Engineering, Beijing Institute of Technology, Beijing 100081, China
Abstract:Experimental and numerical investigations were conducted to highlight the unsteady tip leakage vortex cavitation flow in a hydrofoil tip region. The experiments were conducted in a closed cavitation tunnel, during which a high-speed-camera had been put into use to observe the cavitation patterns. A new cavitation model, which takes into account the effects of vortex on mass transfer process in cavitation, is utilized for the computations of developed tip leakage vortex cavitating flow. Good agreement is observed between the numerical predictions and experimental observations. The results show that unsteadiness of the leading edge attached cavity would significantly change the pressure on the suction side, which is the main reason for the unsteadiness of the shear layer cavitation. The pressure fluctuation at the end of the attached cavity would induce the change of the tip leakage vortex circulation. Furthermore, the breakup of the leading edge cavitation would induce a local high pressure in the suction side, resulting in the decrease of the circulation of the tip leakage cavitating vortex.
[1]DULAR M, BACHERT R, STOFFEL B, et al. Experimental evaluation of numerical simulation of cavitating flow around hydrofoil[J]. European journal of mechanics-B/fluids, 2005, 24(4): 522-538.[2]BOULON O, CALLENAERE M, FRANC J P. et al. An experimental insight into the effect of confinement on tip vortex cavitation of an elliptical hydrofoil[J]. Journal of fluid mechanics, 1999, 390: 1-23.[3]RAINS D A. Tip clearance flows in axial flow compressors and pumps[D]. California: California Institute of Technology, 1954.[4]FARRELL K, BILLET M. A correlation of leakage vortex cavitation in axial-flow pumps[J]. Journal of fluids engineering, 1994, 116(3): 551-557.[5]OWEIS G F, CECCIO S L. Instantaneous and time-ave raged flow fields of multiple vortices in the tip region of a ducted propulsor[J]. Experiments in fluids, 2005, 38(5): 615-636.[6]TALLMAN J, LAKSHMINARAYANA B. Numerical simulation of tip leakage flows in axial flow turbines, with emphasis on flow physics: part I—effect of tip clearance height[J]. Journal of turbomachinery, 2001, 123(2): 314-323.[7]WU H, TAN D, MIORINI R L, et al. Three-dimensional flow structures and associated turbulence in the tip region of a waterjet pump rotor blade[J]. Experiments in fluids, 2011, 51(6): 1721-1737.[8]MIORINI R L, WU H, KATZ J. The internal structure of the tip leakage vortex within the rotor of an axial waterjet pump[J]. Journal of turbomachinery, 2012, 134(3): 403-419.[9]杨昌明, 陈次昌, 王金诺, 等. 轴流泵端壁间隙流动特性的数值研究[J]. 机械工程学报, 2003, 39(9): 49-51. YANG C M, CHEN C C, WANG J N, et al. Numerical study for behavior of tip clearance flow in axial-flow pump[J]. Chinese journal of mechanical engineering, 2003, 39(9): 49-51.(in Chinese)[10]HIGASHI S, YOSHIDA Y, TSUJIMOTO Y. Tip leaka-ge vortex cavitation from the tip clearance of a single hydrofoil[J]. JSME international journal, 2001, 45(3): 662-671.[11]LABORDE R, CHANTREL P, MORY M. Tip clearance and tip vortex cavitation in an axial flow pump[J]. Journal of fluids engineering, 1997, 119(3): 680-685.[12]TAN D Y, MIORINI R L, KELLER J, et al. Flow visualization using cavitation within blade passage of an axial waterjet pump rotor[C]//Proceedings of 24th Symposium on Fluid Machinery, New York:ASME, 2012: 395-404.[13]张德胜, 石磊, 施卫东,等. 轴流泵叶轮叶顶区空化流的数值模拟与实验研究[J]. 水利学报, 2014, 45(3): 335-342.(in Chinese) ZHANG D S, SHI L, SHI W D, et al. Numerical simulation and experimental study on impeller tip region cavitation in axial flow pump[J]. Journal of hydraulic engineering, 2014, 45(3): 335-342.[14]DUCOIN A, ANDRÉ ASTOLFI J, SIGRIST J F. An experimental analysis of fluid structure interaction on a flexible hydrofoil in various flow regimes including cavitating flow[J]. European journal of mechanics-B/flui-ds, 2012, 36(10): 63-74.[15]KUNZ R F, BOGER D A, STINEBRING D R, et al. A preconditioned Navier-Stokes method for two-phase flows with application to cavitation prediction[J]. Computers & fluids, 2000, 29(8): 849-875. [16]SINGHAL A K, ATHAVALE M M, LI H et al. Mathematical basis and validation of the full cavitation model[J]. Journal of fluids engineering, 2002, 124(3): 617-624.[17]HARWOOD C M, YOUNG Y L. A physics-based gap-flow model for potential flow solvers[J]. Ocean engineering, 2014, 88: 578-587.[18]韩宝玉, 熊鹰, 刘志华. 梢涡空化CFD数值方法[J]. 哈尔滨工程大学学报, 2011, 32(6): 702-707. HAN B Y, XIONG Y, LIU Z H. Numerical study of tip vortex cavitation using CFD method[J]. Journal of Harbin Engineering University, 2011, 32(6): 702-707.(in Chinese)[19]SMAGORINSKY J. General circulation experiments with the primitive equations[J]. Monthly weather review, 1963, 91(3):99-164.[20]HUANG B, YIN L Y, WANG G, et al. Combined experimental and computational investigation of unsteady structure of sheet/cloud cavitation[J]. Journal of fluids engineering, 2013, 135:071301.[21]梁辉, 宗智, 邹丽,等. 三维近自由表面水翼升力线理论[J]. 船舶力学, 2013(8):845-850. LIANG H, ZONG Z, ZOU L, et al. Lifting line theory for 3D hydrofoil in proximity to a free surface[J]. Journal of ship mechanics, 2013(8):845-850.(in Chinese)