Influence of different turbulence models on simulation of internal flow field of jet pump
YANG Xue-Long, LONG Xin-Ping, XIAO Long-Zhou, Lv Qiao
(1.School of Power and Mechanical Engineering, Wuhan University, Wuhan, Hubei 430072, China; 2.Key Laboratory of Hubei Province for Waterjet Theory & New Technology, Wuhan, Hubei 430072, China)
Abstract:To study the effect of different turbulence models and related wall boundary treatment methods on the simulation of the performance and internal flow field of a jet pump, and to find their good combination, six turbulence models (namely, three k-ε models, standard and SST k-ω models and Reynolds stress models) and two wall treatment methods (standard wall functions and enhanced wall treatment) were combined in different ways. Standard wall functions and enhanced wall treatment were respectively applied to three k-ε models and RSM model. Both k-ω models were used as lowReynoldsnumber models without applying any wall treatment methods. Ten combinations were thus obtained. The data of the performance and the static wall pressure distribution of a jet pump were employed as the criteria to validate the simulation results. The results show that all the ten combinations agree well with the experiment data when the volumetric flow ratio is relatively low, and all simulation errors of the ten combinations are greater than 10% when working at relatively high flow ratio. After adjusting constants of the turbulent model, for some combinations, the difference between the errors of the predicted results and the experiment data were lowered to be less than 5%. The model constant C2ε has a greater influence than σε on the calculation; and the maximum turbulence energy decreases as C2ε or σε decreases, but the distribution region of turbulence energy expands correspondingly.
杨雪龙, 龙新平, 肖龙洲, 吕桥. 不同湍流模型对射流泵内部流场模拟的影响[J]. 排灌机械工程学报, 2013, 31(2): 98-102.
YANG Xue-Long, LONG Xin-Ping, XIAO Long-Zhou, Lv Qiao . Influence of different turbulence models on simulation of internal flow field of jet pump. Journal of Drainage and Irrigation Machinery Engin, 2013, 31(2): 98-102.
[1]Narabayashi T, Yamazaki Y, Kobayashi H, et al. Flow analysis for single and multinozzle jet pump [J]. JSME International Journal Series B: Fluids and Thermal Engineering, 2006, 49(4):933-940.[2]Long Xinping, Han Ning, Cheng Qian. Influence of nozzle exit tip thickness on the performance and flow field of jet pump[J].Journal of Mechanical Science and Technology, 2008, 22(10): 1959-1965.[3]龙新平,程茜,韩宁,等.射流泵最佳喉嘴距的数值模拟[J].核动力工程, 2008, 29(1):35-38.Long Xinping, Cheng Qian, Han Ning, et al. Numerical simulation of optimal nozzletothroat clearance of jet pump [J]. Nuclear Power Engineering, 2008, 29(1):35-38.(in Chinese)[4]Mallela R, Chatterjee D. Numerical investigation of the effect of geometry on the performance of a jet pump [J]. Journal of Mechanical Engineering Science, 2011, 225(7):1614-1625.[5]龙新平,姚鑫,杨雪龙.多孔喷嘴射流泵流动模拟与涡结构分析[J].排灌机械工程学报,2012,30(2):136-140,152.Long Xinping, Yao Xin, Yang Xuelong. Flow simulation and vortex structure analysis of multinozzle jet pumps[J]. Journal of Drainage and Irrigation Machinery Engineering, 2012,30(2):136-140,152. (in Chinese)[6]Elhayek M D, Hammoud A H. Prediction of liquid jet pump performance using computational fluid dynamics[C]//Proceedings of the 4th WSEAS International Conference on Fluid Mechanics and Aerodynamics. Elounda, Greece:[s.n.], 2006:148-153.[7]Pope S B. Turbulent Flows [M]. Cambridge: Cambridge University Press, 2000.[8]陶文铨.数值传热学[M]. 2版.西安:西安交通大学出版社,2001.