Abstract:Abstract:In order to improve the performance of the canned motor pump and simplify the design period,the canned motor and the hydraulic components of canned motor pump GPS40—-9F were designed on basis of numefical simulation。The command flow was written by using the parametrization design
language APDL in ANSYS and was used to complete the entire magnetic field simulation.Magnetic field lines,magnetic flux density distribution maps derived from two canned motor models were analysed.The three-dimensional model of the hydraulic components in canned motor pump was constructed and the flow field simulation was carried out at different operating points by using SIMPLER algorithm and SIMPLE algorithm in the CFX.The results show that the air-gap flux of model 2 is greater than that of model l,which is nlore conducive to conversion between the electrical and mechanical energy. In the same condi-tions of model and mesh,the calculation by using SIMPLER algorithm is more efficient than that by using SIMPLE aI_Sorithm.Therefore,SIMPLER algorithm is better in convergence results.Comparing the simu-lation results with the experimental values,which confirms that the numerical simul ation computation isfeasible and accutate.
孔繁余,周水清,沈小凯,王文廷,邵 飞. GPS40—9F型屏蔽泵的设计[J]. 排灌机械工程学报, 2011, 29(1): 16-20.
Kong Fanyu,Zhou Shuiqing,Shen Xiaokai,Wang Wenting,Shao Fei. Design of canned motor pump GPS40-9 F. Journal of Drainage and Irrigation Machinery Engin, 2011, 29(1): 16-20.
[1]Spence R, Amaral T J. A CFD parametric study of geometrical variations on the pressure pulsations and performance characteristics of a centrifugal pump[J]. Computers and Fluids, 2009, 38(6): 1243-1257. [2]孔繁余,高翠兰,季建刚,等. 基于Visual C++ 6.0软件平台的屏蔽泵轴向力计算[J].排灌机械,2008,26(6):15-19.Kong Fanyu, Gao Cuilan, Ji Jiangang, et al. Axial force computation of canned motor pump based on visual C++ 6.0 software[J]. Drainage and Irrigation Machinery,2008,26(6):15-19. (in Chinese)[3]孔祥花,孔繁余,季建刚.屏蔽泵能耗的计算与试验[J]. 排灌机械,2007,25(2):26-29.Kong Xianghua, Kong Fanyu, Ji Jiangang. Calculation and experiment on canned motor pump[J]. Drainage and Irrigation Machinery, 2007,25(2):26-29. (in Chinese)[4]许友谊,奚伟永,杨敏官.高速诱导轮三维非定常湍流数值模拟[J].排灌机械, 2008, 26(3): 59-63.Xu Youyi, Xi Weiyong, Yang Minguan. Numerical simulation of 3D unsteady turbulent flow in high-speed inducer[J].Drainage and Irrigation Machinery, 2008, 26(3): 59-63. (in Chinese)[5]孔祥花.屏蔽泵能耗的研究[D].江苏大学流体机械工程技术研究中心,2006.[6]孔祥花,孔繁余,季建刚,等.屏蔽泵冷却润滑回路分析计算[J]. 水泵技术,2006 (5):8-10.Kong Xianghua, Kong Fanyu, Ji Jiangang, et al. The analysis computation of cooling the lubrication loop in canned motor pump[J]. Pump Technology, 2006(5):8-10. (in Chinese) [7]Chen Hongxun, Guo Jiahong.Numerical simulation of 3-D turbulent flow in the multi-intakes sump of the pump station[J]. Journal of Hydrodynamics, 2007, 19(1): 42-47.[8]刘建瑞.微型溴化锂介质屏蔽泵的研制[J].排灌机械,2001,19(1):20-24.Liu Jianrui. Development the miniture shielded pump[J]. Drainage and Irrigation Machinery,2001,19(1) :20-24. (in Chinese)[9]任晓峰,刘建瑞,李文科,等. 屏蔽泵抗汽蚀性能的试验[J]. 排灌机械,2007,25(2):26-29.Ren Xiaofeng, Liu Jianrui, Li Wenke, et al. Study on anti-cavitation of shielded pumps[J]. Drainage and Irrigation Machinery,2007,25(2) :26-29. (in Chinese)[10]徐海峰,辛慧源. ANSYS软件对电机磁场的分析[J]. 电子与封装, 2003 (2):48-50.Xu Haifeng, Xin Huiyuan. One example of redevelopment based on software of ANSYS[J]. Electronics and Packaging,2003 (2):48-50. (in Chinese)
没有找到本文相关文献
江苏大学梦溪校区(镇江市梦溪园巷30号)图书馆5楼 0511-84440893
传真0511--84440033 Copyright 江苏大学杂志社 2010-2015 All
Rights Reserved