Thermal calculation and analysis of bearings lubricating and cooling system of molten salt pump
Shan Chunxian1， Yang Minguan1， Wang Xin2
(1.School of Energy and Power Engineering, Jiangsu University, Zhenjiang, Jiangsu 212013, China; 2.Mechanical and Electronic Technology Institute, Taizhou Polytechnic College, Taizhou, Jiangsu 225300, China)
Abstract：The factors affecting the temperature rise of molten salt pump bearing lubrication and cooling system mainly come from bearing friction heat and heat transfer from high temperature molten salt. With the method of thermal nodes network the thermal balance equations were established for bearing lubrication and cooling system of molten salt pumps. Through the calculation of the bearing friction heat and the cooling system thermal resistance and heat transfer, the influence of shaft rotating speed, molten salt temperature, lubricating oil temperature and flow on bearing temperature was obtained. Higher pump rotating speed, the more bearing friction heat. When the shaft rotating speed increased from 500 r/min to 1 500 r/min, the bearing temperature was raised about 20 ℃. When the molten salt temperature was less than 400 ℃, its influence on lubrication system was lesser. When the molten salt temperature was higher than 550 ℃, the bearing temperature was raised rapidly. By keeping the lubricating oil temperature below 40 ℃, and flow rate within 1.5~2.5 L/min, the best effect of the lubrication cooling could be achieved.
单春贤, 杨敏官, 王 欣. 熔盐泵轴承润滑冷却系统稳态热计算与分析[J]. 排灌机械工程学报, 2010, 28(6): 526-530.
Shan Chunxian，Yang Minguan，Wang Xin. Thermal calculation and analysis of bearings lubricating and cooling system of molten salt pump. Journal of Drainage and Irrigation Machinery Engin, 2010, 28(6): 526-530.
[1]杨敏官,高波,贾卫东,等.高温熔盐泵上轴承冷却系统设计[J].轴承,2006(3):4-6.Yang Minguan,Gao Bo,Jia Weidong,et al.Design of cooling system for top bearings of high temperature melt-salt pump[J].Bearing,2006(3):4-6.(in Chinese)[2]杨敏官,高波,贾卫东,等.熔盐泵轴承冷却及润滑系统的分析[J].江苏大学学报:自然科学版,2005,26(2):149-152.Yang Minguan,Gao Bo,Jia Weidong,et al.Analysis of cooling and lubricating system of bearings in pumps for melted salts[J].Journal of Jiangsu University:Natu-ral Science Edition,2005,26(2):149-152.(in Chinese)[3]Hua Xijin,Wang Jiaxu,Zhu Juanjuan,et al.Study on tribological behavior of water-lubricated bearings[J].Journal of Advanced Manufacturing Systems,2008,7(1):115-121.[4]Zhao Haitao,Yang Jiangguo,Shen Jinhua.Simulation of thermal behavior of a CNC machine tool spindle[J].International Journal of Machine Tools and Manufacture,2007,47(6):1003-1010.[5]叶晓琰,张军辉,丁亚娜,等.海水淡化泵水润滑轴承间隙的优化设计[J].排灌机械工程学报,2010,28(2):117-121.Ye Xiaoyan,Zhang Junhui,Ding Yana,et al.Optimization design for water buricated bearing clearance of seawater-desalination pump[J].Journal of Drainage and Irrigation Machinery Engineering,2010,28(2):117-121.(in Chinese)[6]Jang G H,Park S J,Lee S H.Electromechanical analysis of a HDB spindle motor considering electromagnetics,thermal analysis,hydrodynamic bearing,and rotor dynamics[J].IEEE Transactions on Magnetics,2005,41(5):1608-1611.[7]Qi Liqun,Zhang Guangyu,Liu Yongjin.Modeling and simulation of the thermal network in a space gear-bearing system[C]//2010 IEEE International Conference on Information and Automation,ICIA 2010.Piscataway:IEEE Computer Society,2010:201-205.[8]万长森.滚动轴承的分析方法[M].北京:机械工业出版社,1987.[9]Kim S M,Lee S K.Prediction of thermo-elastic beha-vior in a spindle-bearing system considering bearing surroundings[J].International Journal of Machine Tools and Manufacture,2001,41(6):809-831.[10]Ohishi S,Matsuzaki Y.Experimental investigation of air spindle unit thermal characteristics[J].Precision Engineering,2002,26(1):49-57.[11]刘昌华,骆广进,何卫,等.基于热网络的某主轴系统稳态热分析[J].中国机械工程,2010,21(6):631-635.Liu Changhua,Luo Guangjin,He Wei,et al.Steady state thermal analysis of a spindle system based on thermal network[J].China Mechanical Engineering,2010,21(6):631-635.(in Chinese)
