Abstract：According to the formula of net positive suction head of centrifugal pump,the main factors which affect pump cavitation are the design of pump casing and impeller inlet.The formula of cavitation specific speed is rewritten into a new form related with blade inlet angle,hub-tip ratio and the two factors mentioned above.A diagram is drawn to show the design variables that have effect on the cavitation specific speed.By the diagram,it can be deduced that the optimum blade inlet angle for maximum cavitation specific speed is in the range of 10 to 30 degres.The factor related with impeller has more effect on the cavitation specific speed than that with casing.The cavitation incipient criteria show that any pump works under the condition of cavitation.Therefore,a valid curve,which corresponds to the 0.5% head-drop curve,is recommended here to limit the running range for pump at cavitation condition.
潘中永；倪永燕；李红；曹英杰. 离心泵汽蚀特性分析[J]. 排灌机械工程学报, 2008, 26(4): 35-38.
PAN Zhong-yong, NI Yong-yan, LI Hong, CAO Ying-jie. Analysis on cavitation characteristic in centrifugal pump. Journal of Drainage and Irrigation Machinery Engin, 2008, 26(4): 35-38.
[1] 潘中永.泵诱导轮实验研究与CFD分析[D].镇江:江苏理工大学,2001[2] Henshaw T L.遠心ポンプのNPSHを予测する[J].タボ機械,2001,29(10):7-17[3] 查森.叶片泵原理及水力设计[M].北京:机械工业出版社,1988[4] 袁建平,何志霞,袁寿其.进口条件对组合叶轮性能的影响[J].江苏大学学报(自然科学版),2002,23(3):63-66[5] 张人会,张学静,杨军虎.非设计工况下叶轮进口附近的流动及其控制[J].甘肃工业大学学报,2003,29(4):64-66[6] 许友谊.黑液强制循环泵汽蚀性能的改进设计[J].江苏大学学报(自然科学版),2003,24(6):17-20[7] 黄忠富,姜哲,赵斌娟.利用小波分析诊断水泵初始阶段的汽蚀故障[J].排灌机械,2005,23(2):4-7[8] 倪永燕,潘中永,李红.出口压力波动特性在离心泵汽蚀检测中的应用[J].排灌机械,2006,24(5):40-43[9] Alfayez L,Mba D,Dyson D.The application of acoustic emission for detecting incipient cavitation and the best efficiency of a 60 kW centrifugal pump:case study[J].NDT & E International,2005,38:354-358[10] Escaler X,Egusquiza E,Farhat M.Detection of cavitation in hydraulic turbines[J].Mechanical Systems and Signal Processing,2006,20:983-1007[11] Farge M,Schneider K.Coherent vortex simulation (CVS),a semi-deterministic turbulence model using wavelets[J].Flow Turbulence and Combustion,2001,66(4):393-426
